762084
10
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
8
English
Other info services
Most usual operator/extra services can be accessed via the menu or with the menu
buttons during a call. Some functions are pre-programmed but will not always work
on delivery as this will depend on the country of installation/operator. You can
change the codes that are supplied see Network Codes.
Please note!
The functions available will depend on your service provider.
You may have to pay extra for some services, contact your service provider for more information.
Some services will not work unless you have contacted your service provider to activate them.
Using the Flash button manually
1. Connect an external call and wait until the timer is shown. Press R.
2. Enter telephone number or manual code. Press OK.
Busy number/call waiting
1. Connect an external call and wait until the timer is shown. Press Opt.
2. Scroll to required service. Press OK.
- CW Accept Answer incoming call waiting (=R 2).
- CW Reject Refuse incoming call waiting and send engaged tone (=R 0).
- Auto Call Back When a number is engaged. When the number is free you will hear a
quick ring signal (=5).
Under inquiry/alternating/answered call waiting
Use the respective menu button:
- Brok Switching between two calls (=R 2).
- Conf Conference/three party call (=R 3).
Call Forwarding
1. Press Menu. Scroll to Info Service. Press OK.
2. Scroll to Call Forwarding. Press OK.
3. Scroll to required service. Redirection always/when no answer/engaged for moving your
incoming calls to another telephone number. Press OK.
4. Follow the instructions given in the receiver, speaker or on the display.
Other services
1. Press Menu. Scroll to Info Service. Press OK.
2. Scroll to Functions. Press OK.
3. Scroll to required service.
- Call Anonymous Withhold your number from recipient. The code for this service
must be programmed manually, see below.
- Call Wait On/Off Command to turn the call waiting service off or on easily.
- Network Codes The codes supplied when you use the operator services can be
changed. The number for Message indication can also be programmed here.
4. Press OK. Follow the instructions given in the receiver, speaker or on the display.
Message menu
Shows a summary of new messages e.g. SMS, incoming numbers, message indication etc.
Only shown when there are new messages.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Doro 650R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info