Tip: Some features require extra
memory
capacity
3. Micro-SD card
(optional)
Lightly press the
card holder and
push it carefully
toward SIM card
holder until it unlocks. The card holder
can now be ipped up vertically
the memory card in the plastic bracket.
Make sure that the memory card
contacts face down and that the card is
placed in formed area area. Do not
scratch or bend the card contacts.
Push the metal holder back down,
press it at and slide it until it snaps
into place.
1. Left soft key
Press to open
menu
2. Right soft key
Press to open -
book
3. Call key
Make and answer
calls;
Press once to
Call log
4. End key
Press to end
press to return to
standby;
press and hold to turn
the
phone on and off
5. Speed
dial/Quick
functions
keys
M1 and M2 are speed
dial keys.
Camera and SMS key
for quick access
6. Arrow keys
Press to open
shortcut functions;
press to open
messages;
scroll up and down in
menus and lists
7. Numerical
keys
Press to enter -
bers;
long press key 1, to
call your voice -
box (phone number
must be stored);
when writing, press
to input numbers or
characters
8.
*
key
Press to enter
“*”/ “+” /
when writing, press to
enter special charac-
ters
9. Charging cradle
10.
#
key
Long press to toggle
between Silent and
Normal mode
1Cradle charging contacts
12. Micro-USB
port
For charger
13. Headset
socket
For 3.5 mm standard
headset
14. T
15. Camera lens
16. Loudspeaker
17. Assistance key
18. T
Switch torch on and
off
19. Keypad lock
lock/unlock
20. + and - keys
Adjust ring volume
and loudspeaker
volume
21. LEDs
Blue = battery full;
Red = battery charg-
ing
Install the SIM card and the battery
The SIM card holder is located inside the
battery compartment.
CAUTION
Only use batteries, charger and
accessories that have been approved for
use with this particular model. Connecting
other accessories may be dangerous and
may invalidate the phone’s type approval
and guarantee.
1. R
Slide your
ngernail into the
small notch on the
bottom side of the
phone and pull
the cover upward.
If the battery is installed, slide your
ngernail in the notch below the
Assistance key to lift it up.
2. Insert the SIM card
(required)
Insert the SIM
card by carefully
slide it under the
metal bracket.
Make sure the contacts on the SIM
card face down and the cut off corner
is positioned according to the gure.
Do not scratch or bend the card
contacts. T
with your ngers.
English
© IVS GmbH 20
QSG_Primo_by_Dor
English
V
0359
Specications
Network:
GSM 900/1800/1900
(T
Dimensions:
1
Weight
88 g
Battery:
3.7V/1000 mAh Li-ion
battery
Operating ambient
temperature:
Min: 0°C (32°F)
Max: 40°C (104°F)
Charging ambient
temperature:
Min: 0°C (32°F)
Max: 40°C (104°F)
Storage
temperature:
Min: -20°C (-4°F)
Max: 60°C (140°F)
Changes and errors excepted.
EN
IMPORT
Use only compatible memory cards
with this device. Compatible card type:
microSD, microSDHC.
Incompatible cards may damage the
card itself, the device and corrupt any
data stored on the card. Depending on
the market some phones may have a
pre-installed memory card.
4. Insert the battery
(required)
Push it into the
battery
compartment
ensure that the
three contacts on the battery touches
the three spring contacts in the battery
compartment.
5. Replace the cover and press it all the
way around to make sure it is closed
When battery performance is low
empty battery symbol ashes. T
the battery
the micro USB connector on the bottom
side of the phone.
place the telephone in the charge cradle
connected to the mains adapter via the
USB cable.
During charge, the red charge LED is on.
The battery charge icon moves during
charge (visible in the upper right corner
of the display). It takes approximately 3
hours to fully charge the battery
charged the charge icon stops moving.
Power on the phone
Press and hold the red key on the
phone at least 2 sec. to turn it on and off.
If the SIM card is valid and protected with a
PIN code (Personal Identication Number),
Enter PIN
is displayed.
Enter the SIM PIN code and press
OK
( upper left corner of keypad). Delete
with
Delete
( upper right corner of
keypad).
Set the language
By default the phone’s menu language
is determined by the SIM card. Y
always switch between the languages
supported by the phone.
1. Press
Menu
â
Settings
â
OK
.
2. Select
Phone settings
â
OK
.
3. Select
Language
â
OK
.
4. Select language from the list â
OK
.
Answer a call
1. Press or
Answer
to accept the call
or press
Reject
to reject the call (busy
signal).
Alternatively to
reject the call directly
2. Press to end the call.
Create phonebook entry
1. Press
Menu
â
Phonebook
â
OK
.
2. Select
Add new contact
â
Add
.
3. Select whether you want to save the
contact on the SIM card or in the phone.
4. Enter a name for the contact.
5. Press .
6. Enter the phone number including the
area code.
7. Press .
8. Then press
Options
â
Save
â
OK
.
Tip: For international calls, always enter
a + symbol before the country code to be
able to use the phonebook optimally in
any country
Press the
*
key twice to enter the inter-
national area code + .
Speed dial (M1, M2)
Note!
The contacts for the speed dial keys
must already be stored in the Phonebook.
M1 and M2 setup
1. Press
Menu
â
Contacts
â
OK
.
2. Select a contact for
M1
or
M2
keys.
3. Press
Options
â
Speed dial
â
OK
.
4. Select the line
M1
or
M2
â
Save
.
5. Conrm the
Save?
with
Ye
.
Set time and date
1. Press
Menu
â
Settings
â
OK
.
2. Select
Phone settings
â
OK
.
3. Select
Time and date
â
OK
.
4. Select
Set time/date
â
OK
.
5. Enter the time (HH:MM) â .
6. Enter the date (DD.MM.YYYY) â .
7. Use
*
and
#
to select
Daylight saving
â
On
or
Off
â
Save
.
Make a call
1. Enter the phone number with the area
code. Y
Clear
.
2. Press to dial. Press
Abort
to
cancel the call.
3. Press to end the call.
Tip: For international calls, always enter
a + symbol before the country code to be
able to use the phonebook optimally in
any country
Press the
*
key twice to enter the inter-
national area code + .
SOS calls
As long as the phone is switched on, it is
always possible to place an SOS call by
entering the main local emergency number
for your present location followed by .
Some networks accept calls to emergency
numbers without a valid SIM card. Contact
your service provider for more information.
Note! Credit is NOT required - but the SIM
card must be registered and activated.
Emergency numbers are only intended
for urgent assistance, and should only
be called in an emergency
not misuse the emergency number as
this may prevent someone with a real
emergency from getting through.
V
Y
using the side keys
+/-
.The volume level is
shown on the display
Enter text
Select character
• Press a numerical key repeatedly until
the desired character is shown.
• W
yellow background of the character has
disappeared) before entering the next
character
Special characters
• Press
*
to view a list of special
characters.
• Select the desired character with
*
or
#
(to move left and right) and press
OK
to
enter
Move the cursor within text
• Use the keys
/
to move the
cursor within the text.
Upper case, lower case and numerals
• Press
#
to choose the input mode.
The symbol at the top left in the display
indicates the input mode.
Primo
™
366
Instructions
