Bedienungsanleitung Doro WT 96pro (Seite 3 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

570034

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Vibrator



of the call tone.

Press

 

Select the desired setting using v/V

( =tone+vibrator, =ringer only, =vibrator

only).

Press PTT to conﬁrm.

Monitor function







Press

and V at the same time.

To stop monitoring press

Termination (Roger) tone



the PTT button. This can be used as a reminder to the





Press

 

Select the desired setting using v/V ( =oﬀ,

=on).

Press PTT to conﬁrm.

Key tone

Press

 

Select the desired setting using v/V ( =oﬀ,

=on).

Press PTT to conﬁrm.

Dual channel monitoring (DCM)



communicating on the current operating channel.

Press

DCM

Select the desired channel to monitor using v/V

( =oﬀ).

Press

once for CTCSS or twice for DCS, and set

the desired subchannel using v/V.

Press PTT to conﬁrm.

Scanning



channels to locate transmitting channels.

Press

repeatedly until SC is displayed.

Press v/Vto start scanning the channels.

Press



modes, then v/V to start scanning sub-

channels.

Press PTT to stop scanning.

If the handsets are unable to communicate, it may be because

different channels or sub-channels have been selected, that the

battery is running low, or that the units are too far apart.

Headset

A headset can be connected to the headset socket. Use

the PTT button on the headset cable.

Please note!

Using a headset on high volume can damage your hearing. Adjust

the sound volume carefully when using a headset.

Channel selection









Press

Select the desired channel using v/V.

Press PTT to conﬁrm.

Sub-channels











0.

Press





Select the desired sub-channel using v/V

(CTCSS 0–38, DCS 0–83).

Press PTT to conﬁrm.

Voice control (VOX)









Please note!

Transmission can be inadvertently activated by background noise.



Press

VOX

Select the desired sensitivity using v/V

( =oﬀ, 1=least sensitive... 3=most sensitive).

Press PTT to conﬁrm.

Call melody



Press

 

Select the desired melody (1–5) using v/V

Press PTT to conﬁrm.

Doro WT 96pro Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info