Bedienungsanleitung Dovre 2576CBS (Seite 37 von 164) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

571221

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

H Fireproof ceiling

I Combustible ceiling

J Convection air outlet

K Insulation

L. Fireproof floor

M Combustible floor

N Opening to prevent pressure build-up

O Connection pipe

Finish

1. Put all dismantled parts back into the appliance in

their correct places.

2. Ensure that the newly built hearth is dry enough

before firing the stove.

Never light a fire in the appliance without the

fireproof inner plates.

The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make

an intense fire and keep it going for a good few hours.

This will cure the heat-resistant paint finish. This may

result in some smoke and odours. You could open

windows and doors for a while in the area where the

appliance is located.

Fuel

This appliance is only suitable for the burning of

natural wood; sawn and chopped wood that is

sufficiently dry.

Do not use other fuels, as they can lead to serious

damage to the appliance.

You are not allowed to use the following fuels, as they

pollute the environment and because they heavily soil

the appliance and flue, which may lead to a chimney

fire:

Treated wood, such as scrap wood, painted wood,

impregnated wood, preserved wood, plywood and

chipboard.

Plastics, scrap paper and domestic waste.

Wood

Hardwood, such as from oaks, beeches, birches

and fruit trees, is the ideal fuel for your stove. This

type of wood burns slowly with calm flames.

Softwood contains more resins, burns faster and

gives off more sparks.

Use dried wood that contains no more than 20%

moisture. The wood must have dried for at least 2

years.

Saw the wood to size and split it when it is still

fresh. Fresh wood is easier to split, and split wood

dries more easily. Store the wood under a roof

where the wind has wind free access.

Do not use damp wood. Damp logs do not produce

heat as all of the energy is used in the evaporation

of the moisture. This will result in a lot of smoke

and soot deposits on the door of the appliance and

in the chimney. The water vapour will condense in

the appliance and can leak away through chinks in

the appliance, causing black stains on the floor. It

may also condense in the chimney and form

creosote. Creosote is a highly flammable

compound and may cause a chimney fire.

Lighting

You can check whether the flue has enough draught

by lighting a ball of paper above the baffle plate. A cold

flue often does not have enough draught and

consequently, some smoke may escape into the room

instead of up the chimney. By lighting the fire in the

way described here, you can avoid this problem.

1. Stack two layers of medium sized logs crosswise.

2. Stack two layers of kindling crosswise on top of

the logs.

3. Place a firelighter cube in the lower layer of

kindling and light the cube according to the

instructions on the packaging.

Subject to change because of technicalimprovements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dovre 2576CBS Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info