Bedienungsanleitung Dovre 2620SC-B (Seite 65 von 253) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

571616

Zoom out

Zoom in

Vorherige Seite

1/253

Nächste Seite

Maintenance

Follow the maintenance instructions in this chapter to

keep the stove in good condition.

Chimney

In many countries, you are required by law to have

your chimney checked and maintained.

At the beginning of the heating season: have the

chimney swept by an expert.

During the heating season and after the chimney

has not been used for a long time: have the chim-

ney checked for soot deposits.

After the heating season: seal off the chimney with

a ball of paper.

Cleaning and other regular

maintenance activities

Do not clean the stove when it is still warm.

Clean the exterior of the stove with a dry lint-free

cloth.

You can clean the stove interior thoroughly at the end

of the heating season:

If necessary, first remove the fire-resistant inner

plates. See the chapter "Installation" for instruc-

tions on removing and installing the inner plates.

If necessary, clean the air supply ducts.

Remove the baffle plate at the top of the appliance

and clean it.

Checking fire-resistant inner plates

The fire-resistant inner plates are consumables and

subject to wear . Check the fire-resistant inner plates

frequently and replace them when necessary.

See the chapter "Installation" for instructions on

removing and installing the inner plates.

The insulating vermiculite or chamotte inner

plates may develop hairline cracks, but this

does not affect their performance adversely.

Cast-iron inner plates last a long time if you

remove frequently the ash that can accumulate

behind them. If accumulated ash behind the

cast-iron plate is not removed, the plate will no

longer be able to dissipate the heat to the sur-

roundings and this may cause the plate to warp

or crack.

Never use the stove without the fire-resistant

inner plates.

Dismantling damper and baffle

plate

Both the damper and the baffle plate can be dis-

mantled. To dismantle the baffle plate, the damper

and the damper rod must first be removed.

1. Open the stove door.

2. Lift the closed damper slightly and slide it above

the baffle plate so that they are both free.

3. Remove the damper and the damper rod from the

appliance.

4. Loosen the support plate by loosening the M8 nut.

The support plate is located in the middle against

the top plate of the appliance.

5. Lift the baffle plate at the front, pull the baffle plate

forward and take the baffle plate out of the appli-

ance.

Comment: To fit the damper and the baffle plate,

before starting to use the appliance, follow the above

instructions in the reverse order.

Cleaning glass

Dirt clings less easily to well-cleaned glass. Proceed

as follows:

1. Remove dust and loose soot with a dry cloth.

2. Clean the glass with stove glass cleaner:

a. Apply stove glass cleaner to a kitchen sponge,

rub down the entire glass surface and give the

cleaning agent time to react.

b. Remove the dirt with a moist cloth or kitchen

tissue.

3. Clean the glass again with a normal glass cleaning

product.

Subject to change because of technical improvements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dovre 2620SC-B Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info