Bedienungsanleitung Dovre Sense 400 (Seite 56 von 291) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Norwegisch)

571249

Zoom out

Zoom in

Vorherige Seite

1/291

Nächste Seite

09-20021-017

2. Connect the appliance to the flue hermetically.

3. For outside air supply connection: connect the out-

side air supply to the connection kit which is fitted

to the appliance.

4. Re-position all removed parts to the correct places

in the appliance.

Never use the appliance without the fire-res-

istant inner plates.

The appliance is now ready for use.

Use

First use

When you use the appliance for the first time, make

an intense fire and keep it going for a good few hours.

This will cure the heat-resistant paint finish. This may

result in some smoke and odours. You could open win-

dows and doors for a while in the area in which the

appliance is located.

Fuel

This appliance is only suitable for burning natural

wood; sawn and chopped wood that is sufficiently dry.

Do not use other fuels, as they can cause serious

damage to the appliance.

The following fuels may not be used as they pollute

the environment, and because they heavily pollute the

appliance and flue, which may lead to a chimney fire:

Treated wood, such as scrap wood, painted wood,

impregnated wood, preserved wood, plywood and

chipboard.

Plastics, scrap paper and domestic waste.

Wood

Hardwood, such as oak, beech, birch and fruit tree

wood is the ideal fuel for your stove. This type of

wood burns slowly with calm flames. Softwood

contains more resins, burns faster and sparks

more.

Use seasoned wood that contains no more than

20% moisture. The wood should have been

seasoned for at least 2 years. Wood with a mois-

ture content of 20% provides 4.2 kWh per kg wood.

Wood with a moisture content of 15% provides 4.4

kWh per kg wood. Freshly felled wood has a mois-

ture content of 60% and only provides 1.6 kWh per

kg wood.

Saw the wood to size and split it while it is still

fresh. Fresh wood is easier to split, and split wood

dries more easily. Store the wood under a roof

where the wind has free access.

Do not use damp wood. Damp logs do not produce

heat as all the energy is used in the evaporation of

moisture. This will result in a lot of smoke and soot

deposits on the appliance door and in the flue. The

water vapour will condense in the appliance and

can leak away through chinks in the stove, causing

black stains on the floor. It may also condense in

the chimney and form creosote. Creosote is a

highly flammable compound and may cause a chim-

ney fire.

Lighting

You can check whether the flue has sufficient draught

by lighting a ball of paper above the baffle plate. A cold

flue often has insufficient draught and consequently,

some smoke may escape into the room instead of up

the chimney. You can avoid this problem by lighting

the fire as described below.

Subject to change because of technicalimprovements

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dovre Sense 400 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info