680255
94
Zoom out
Zoom in
Vorherige Seite
1/129
Nächste Seite
5-18
Advanced Setup
For the Data Filter:
IN: Specify the rule for filtering incoming packets.
OUT: Specify the rule for filtering outgoing packets.
Protocol: Specify the protocol(s) this filter rule will apply to.
IP Address: Specify a source and destination IP address for
this filter rule to apply to. Placing the symbol "!" before a par-
ticular IP Address will prevent this rule from being applied to that
IP address. It is equal to the logical NOT operator.
Subnet Mask: Specify the Subnet Mask for the IP Address
column for this filter rule to apply to.
Operator: The operator column specifies the port number set-
tings. If the Start Port is empty, the Start Port and the End
Port column will be ignored. The filter rule will filter out any port
number.
= : If the End Port is empty, the filter rule will set the port
number to be the value of the Start Port. Otherwise, the
port number ranges between the Start Port and the End
Port (including the Start Port and the End Port).
!= : If the End Port is empty, the port number is not equal
to the value of the Start Port. Otherwise, this port number
is not between the Start Port and the End Port (includ-
ing the Start Port and End Port).
> : Specify the port number is larger than the Start Port
(includes the Start Port).
< : Specify the port number is less than the Start Port
(includes the Start Port).
Keep State: When checked, protocol information about the
TCP/UDP/ICMP communication sessions will be kept by the IP
Filter/Firewall (the Firewall Protocol option (see fig. 5.x on page
5-17) requires that TCP or UDP or TCP/UDP or ICMP be se-
lected for this to operate correctly).
94

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Draytek Vigor 2000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info