680221
139
Zoom out
Zoom in
Vorherige Seite
1/988
Nächste Seite
Vigor2862 Series User’s Guide
123
Ping Detect - The router sends an ICMP (Internet Control
Message Protocol) echo request every second to the host,
whose address is specified in the Ping IP field, to verify
the WAN connection. If the remote host does not respond
within 30 seconds, the WAN connection is deemed to have
failed.
Primary/Secondary Ping IP – If you choose Ping
Detect as detection mode, you have to type
Primary or Secondary IP address in this field for
pinging.
Ping Gateway IP – If you choose Ping Detect as
detection mode, you also can enable this setting
to use current WAN gateway IP address for
pinging.
With the IP address(es) pinging, Vigor router can
check if the WAN connection is on or off.
TTL – Time To Live, the maximum allowed number
of hops to the ping destination. Valid values range
from 1 to 255.
Ping Interval – Type the interval for the system to
execute the PING operation.
Ping Retry – Type the number of times that the
system is allowed to execute the PING operation
before WAN disconnection is judged.
PPPoE/PPPoA Client ISP
Access Setup
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – PPP Service Name. Enter if your ISP requires this
setting; otherwise leave blank.
Username – Name provided by the ISP for PPPoE/PPPoA
authentication. Maximum length is 62 characters.
Password – Password provided by the ISP for PPPoE/PPPoA
authentication. Maximum length is 62 characters.
PPP Authentication –The protocol used for PPP
authentication.
PAP only- Only PAP (Password Authentication Protocol)
is used.
PAP or CHAP- Both PAP and CHAP
(Challenge-Handshake Authentication Protocol) can be
used for PPP authentication. Router negotiates with the
PPTP or L2TP server to determine which protocol to
use.
Always On – If selected, the router will maintain the
PPPoE/PPPoA connection.
Idle Timeout – Maximum length of time, in seconds, of idling
allowed (no traffic) before the connection is dropped.
ISP Address from ISP - Specifies how the WAN IP address of
the channel configured.
Fixed IP
Yes - IP address entered in the Fixed IP Address field
will be used as the IP address of the virtual WAN.
No - Virtual WAN IP address will be assigned by the ISP’s
PPPoE/PPPoA server.
MPoA Obtain an IP address automatically – Select this option if the
router is to receive IP configuration information from a DHCP
139

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Draytek Vigor 2862 LTE Series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info