Bedienungsanleitung Drayton MiTime T740M (Seite 2 von 2) (Englisch)

653176

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Battery Handling

Batteries, rechargeable or not, should not be disposed

of into ordinary household waste. Instead, they must be

recycled properly to protect the environment and cut down

the waste of precious resources.

Your local waste management authority can supply details

concerning the proper disposal of batteries.

In compliance with the EU Directive 2006/66/EC, the button

cell battery located on the printed circuit board inside the

product, can be removed at the end of the product life, by

professional personnel only.

Note: Settings

changes can be

made via the

MiTime unit

MiStat

Current room temperature

+hr key: Press to add up

to 3 hours to the current

period or to get instant

1 to 3 hours if currently

off (see step 8).

key: Press to

toggle between

Comfort setting, Eco

setting and Home

(Room thermostat

only). See table below.

key: Press to

cancel +hr and display

home. (Cylinder

thermostat only)

Select key: Press

to open and save

editor screens

Current Setting,

see table below

Current set temperature

Call for heat indication.

This ﬂame will be visible

when the room

temperature is below

the set temperature.

+ & - keys:

Press to change

the current

temperature or

turn the heat on

if currently off

RF transmission indication.

The RF symbol will be

visible as follows,

Short ﬂashes indicates an

RF transmission.

Long ﬂashes indicates an RF

transmission issue.

Symbol in

display

Function Description

Comfort setting

Selects the comfort setting. The pre-set value is used

each time when activated, adjustable within the menu

Eco setting

Selects the Eco setting. The pre-set value is used each

time when activated, adjustable within the menu.

None Home screen

Indicates that the pre-set temperatures were changed

via +/- key

Press Select to enter a speciﬁc

Setting. Options shown below:

→

Feature: Description: Factory Pre-Set:

Help Tips Describes the button functions

Holiday switch

off

In the period until holiday starts the product will operate normally.If holiday

is disabled manually or terminates automatically, the mode before start

of holiday will be re-instated.An enabled holiday will be indicated with a

suitcase symbol in the top line. If holiday is active, in the Set: line the holiday

end date will be indicated. In the Summary screen the suitcase will be visible

together with the holiday temperature.

Status Enable or disable holiday mode. Disabled

Zones Holiday mode can be applied to a speciﬁc zone or

all zones

All zones

Holiday start

time (From)

Set the time for the start of your holiday Current time -

nearest hour

Holiday start

date (From)

Set the date for the start of your holiday Today

Holiday end time

(To)

Set the time for the end of your holiday Current time -

nearest hour

Holiday end date

(To)

Set the date for the end of your holiday Today + 1 week

Time and date settings

Set time To set time of day Factory set

Set date To set date Factory set

Daylight saving To enable or disable daylight saving Enabled

Clock format To select 12h or 24h clock mode 12hr

Feature: Description: Factory Pre-Set:

Programme

Timetable

On & Off times for the current period can be

modiﬁed. See description in ‘Step 4’

Copy days Will copy the current day to one or more other days

Add Period Adds a Time event. It will be added at the correct

position within the day. There is a maximum of 4

periods.

Remove Period Removes the selected period. There needs to be at

least 1 period

Change

Timetable Type

The visible day-blocks available in "programme

timetable" can be deﬁned, see Step 4

Individual days Each day can be programmed individually

Week and

weekend

Mon… Fri and Sat… Sun can be programmed as 2

blocks

Default

All week Mon…Sun can be programmed as one block

Stored

programmes

MiTime contains 3 pre-set programmes. These

programmes can be modiﬁed according to personal

needs and can be stored by using a name. Via this

name they can also be re-loaded. Once a programme

has been modiﬁed, the original factory pre-set will no

longer be available unless a System Reset is applied -

see Installation Guide Step 4.

Programme 1

Load stored

programme

A pre-set programme can be loaded

Save current

programme

The current programme can be saved by name (Each

pre-set program includes: Individual days, week/

weekend, all day and custom day schedules)

Step 6: Additional User Settings

Step 7: Keys and Display - MiStat Step 8: +hr (Boost) Step 9: Changing the Batteries

RF Pack: MiStat N110R, MiStat C110C

How do I know when to change

the batteries?

When the batteries start to run low a battery icon will

ﬂash in the display to indicate “low battery”, during

this time the MiStat will function normally. When the

battery icon alone is alone is shown in the display, the

batteries are completely exhausted and the MiStat will

cease to function (see below). Re-activate by replacing

the batteries.

How to replace the batteries

Remove the battery covers as shown. Replace the batteries with 2 x 1.5V IEC LR6 (AA) Alkaline batteries ensuring

correct orientation. Replace the battery covers pressing fully home.

Battery Covers:

Slide outwards

to remove

MiStat Rear

MiStat

→

MiStat

✎ Troubleshooting:

Press +hr to Boost

MiStat

Press +/- to adjust +hr period between 0 and 3 hours

Press ( ) to conﬁrm

Now the Boost is running. The time will be counted

down each hour.

Once the time has elapsed, control returns to the

prior temperature screen.

The Boost can be cancelled by pressing the (

) key

or by setting the +hr period to 0.

1 Setting temperature values is restricted

Are Minimum/Maximum temperatures activated?

see Installation Guide Step 8.

NO SIGNAL is visible on the screen, no reaction on

key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

Is the room thermostat powered? see Homeowner

Guide Step 9.

3 LOCKED is displayed on the room themostat

a see Installation Guide Step 8 - Screen Lock

4 Is the battery symbol visible?

a Replace batteries, see Homeowner Guide Step 9.

STARTING is visible on the thermostat screen, no

reaction on key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

WAIT is visible on the thermostat screen, no reaction

on key presses anymore

Is the receiver powered? (Red signal lamp should

be visible)

Step 5: Period Settings

Stored programmes

MiTime contains 3 pre-set programmes. An

example is shown below. These programmes can

be modiﬁed according to personal needs and

can be stored by using a name. Via this name they

also can be reloaded. Once a programme has

been modiﬁed, the original factory pre-set will no

longer be available. On a System Reset, only the

current loaded programme will be replaced with

the factory setting – see Installation Guide Step 4.

1st On 6:30am 6:30am 7:00am

1st Off 8:30am 8:30am 9:00am

2nd On 4:30pm 4:30pm 4:00pm

2nd Off 10:30pm 10:30pm 11:00pm

All week Week & Weekend

Mon-Sun Mon-Fri Sat-Sun

Programme 1

Example:

Step 4: Prog. Timetable

→

Zone = Heating

Help text: Use left/right buttons to

select the days you want to change

Period 1 settings: describes the current timetable

settings, e.g. Heating has been programmed to

turn On at 6:30am and go off at 8:30am

Period 2 settings: describes the current timetable

settings, e.g. Heating has been programmed to

turn On at 4:30pm and go off at 10:30pm

Press select (

) when highlighted to adjust

settings (see Step 5)

Up to 4 periods can be programmed

Arrow denotes that further options are

available if you scroll down.

Timetable day range: Monday to

Friday (Week and weekend)

Options: Individual days (7day), Week and

weekend (5/2day), All week (24hr). The

available blocks depend on the selection

in menu “change timetable type”

Link to Copy days

Day range & period

Help text: Use left/right buttons to

change ﬁelds

Period settings: On at 6:30am and Off

at 8:30am

Highlight shows adjustable ﬁeld:

Use up/down buttons to adjust values

Drayton MiTime T740M Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Drayton MiTime T740M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info