Bedienungsanleitung DreamLED PTWC-30 (Seite 1 von 2) (Deutsch, Englisch, Holländisch, Französisch)

749021

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

PACKAGE CONTENTS

See illustration 1

The Dreamled® PTWC-30 set consists of:

• 3x Wax Pine Tree: 1x 8x10 cm + 1x 10x14 cm + 1x 11x17 cm

• Remote control (CR2025 battery included)

BATTERY INSTALLATION

Each tree of the PTWC-30 set requires 3x AAA batteries

(not included). Open the battery compartment and insert the

batteries, paying attention to the correct polarity. Close the

battery compartment. Use the switch to turn the lights ON/OFF.

SAFETY INSTRUCTIONS

• We recommend alkaline batteries for optimum performance.

• Only use one type of battery at a time.

• Never mix new and old batteries.

• Never use damaged batteries.

• Insert the batteries according to the poles (+, -) to prevent

leakage.

• The terminals of the power supply must not be short-circuited.

• If the product will not be used for a long time, it is

recommended to remove the batteries.

• Do not dispose of batteries in re or in nature.

• Never attempt to recharge ordinary (non-rechargeable)

batteries.

• Do not mount or place near gas or electric heaters, replaces,

or other similar sources of heat.

• This product is for indoor use only.

• Do not use or immerse in water or any other liquid.

• This product is not a toy, keep away from babies and young

children.

• Keep out of direct sunlight. The PTWC-30 trees are made

from wax and they can melt if placed in sunlight for prolonged

periods of time.

• Handle the trees with care. If dropped,the casing and internal

workings may break and cease to work.

• Clean your trees with a damp cloth or duster.

USE OF THE REMOTE CONTROL

Note:

• When using the remote control for the rst time, you need

to remove the protection foil from the battery compartment.

• The remote control is not waterproof.

• Do not use the remote control in rooms with temperatures

above 50°C.

• When a tree is turned off using the remote control, the last

used setting will be saved.

See illustration 2

1. Power buttons: To turn the lights ON/OFF

2. Timer buttons: Set a timer for 4 or 8 hours

3. Mode buttons: Candle light mode or Steady light mode

4. Dim buttons: Brighten or darken the light

TIMER SETTINGS

If you want to use the lamp for a specic time period, you can

set a timer.

• Press one of the timer buttons (4H/8H) to select the desired

timer setting. the light will ash 1x. The tree will turn OFF

automatically after 4 or 8 hours, and will automatically turn

ON again after 20 or 16 hours.

• When the tree is turned OFF using the remote control or the

ON/OFF switch, the timer settings will be deleted.

WASTE DISPOSAL

Dispose of electronic devices in an eco-friendly fashion!

Electronic devices do not belong in your household waste.

Compliant with European Guideline 2002/96/EG for electric and

electronic devices, used electronic devices must be collected

separately and taken in for environmentally sound recycling.

Options for disposing of used devices may be obtained from your

township, city or municipal government. Incorrect disposal of

batteries can harm the environment! They can contain poisonous

heavy metals and are subject to treatment as hazardous wastes.

Take your used batteries to a municipal collection site.

SUPPORT

For more information, technical questions and return requests

concerning this product, you should contact:

support@dream-led.eu.

GUARANTEE

of TE-Group NV. The Dreamled® brand stands for superior

product quality and outstanding customer service. That is why

Dreamled® warrants this product against all defects in material

and workmanship for a period of two (2) years from the date of

original purchase of the product. The terms of this guarantee and

the extent of responsibility of Dreamled® under this warranty can

be downloaded from the website www.dream-led.eu.

ENGLISH

ILLUSTRATION 1

ILLUSTRATION 2

DECLARATION OF CONFORMITY

Hereby, Par la présente,

Company / Entreprise: TE-Group NV

Address: / Adresse: Kapelsestraat 61, 2950 Kapellen,

Belgium

declare that the following equipment:

déclare que le dispositif suivant:

Product name / Nom du produit: DreamLED PTWC-30

Product type / Type de produit:

Pinetree Wax Candle Set

conforms with the following safety requirements of

the directives 2014/30/EU, 2011/65/EU, 2015/863/

EU. Conformity is guaranteed by the CE-symbol. This

product has been tested against following standards

and specifications, applying versions valid in September

2019. The full text of the EU declaration of conformity is

available at the following internet address:

http://www.dream-led.be/DOC_PTWC-30

est conforme aux exigences de sécurité suivantes des

directives 2014/30/EU, 2011/65/EU, 2015/863/EU. La

conformité est garantie par le symbole CE. Ce produit

a été testé par rapport aux normes et spécifications

suivantes, appliquant les versions valides en Septembre

2019. Le texte complet de la déclaration UE de conformité

est disponible à l’adresse internet

http://www.dream-led.be/DOC_PTWC-30

EN 55015:2013+A1:2015

EN 61547:2009

EN 61000-3-2:2014

EN 61000-3-3:2013

J. Van Os, Product & Research Manager TE-Group NV

Authorized Signature, Kapellen - September 2019

• LED QTY: 1x F5 LED/Tree

• Durability: > 60000 hours

• Color temperature: 2400~2700 K

• Voltage: 4.5 V (3x 1.5V AAA battery – not included)

• Lumen: Max. 8

• Operating temperature: -25°~ +80°

• Dimensions / Weight:

1x 10x8 cm – 135 g

1x 10x14 cm – 253 g

1x 11x17 cm – 276 g

TECHNICAL DATA

PINETREE WAX

CANDLE SET

USER’S MANUAL PTWC-30

GB NL FR D

DreamLED PTWC-30 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info