Bedienungsanleitung DreamLine Oceana Shower Cabin (Seite 4 von 11) (Englisch)

662559

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Rev. 1.1.

Cabin Installation

1. Choose the location where you will be installing the tray, mark the location of the tray

because you may need to move it out from the position for better assembling procedure.

Check on the drain if it is fastened tight enough to make sure it won’t leak after

complete tray installation.

2. Also сheck all the hose connections to prevent leakage. Your plumber may want to

replace the drain flex hose to hard PVC pipes which is also possible (instructions are

provided in the manual).

3. For installation of the drain in the floor please refer to the Legs and frame position

(top view) diagram and fig 1 (actual position of the drain and frame on the tray).

4. Secure the two standing posts and the bottom guide rail with ST4.2×30 round head self

tapping screws (fig 2);

5. Place U shape gasket on the stationary glass side and bottom edge. Then press the

stationary glass panel into the grooves of the guide rail and the standing post (You can

apply a liquid soap on the outside surface of the U shape gasket to help to slide glass

into the channel) (fig 3);

6. Place U shape gasket on the stationary glass top edge. Then press the top guide rail

onto the glass. Use ST4.2×30 round head self tapping screws to secure the top guide

rail to the standing posts. Insert the white seal gasket into the middle part of the guide

rail slot (fig 4);

7. Place the tray in the required position. You may need to take off the front skirting panel

for easy access. Adjust the legs to level the tray in case the surface is uneven. Fasten

the counter nuts on the legs to secure the height; (fig 5)

8. Move the tray out. Clean the surface of the tray threshold and apply a layer of silicone

on to the edge; put the back panel onto the tray and fix them with M6×20 bolt sets; (fig 6

& 7)

9. Clean the front threshold of the tray and apply a layer of silicone. Put the glass

enclosure assembly onto the tray and adjust the position. Use ST4.2×20 flat head self

tapping screw with washer to connect the standing posts and back panel; (fig 8 & 9)

10. Clean the top surface of the built enclosure assembly and apply a layer of silicone. Put

the roof on the fixed shower enclosure and using M6×20 bolt sets connect it to the back

panel; (fig 10)

11. Your unit can be shipped to you with the wheel assembles installed on the doors. If not,

please refer to diagram (fig 11) how to install it. Attach the top and bottom wheels to the

glass doors. The wheel that goes on the top has an adjustable screw and nut to adjust

the door level. Note that the lock nut of upper wheel should face up. The bottom wheel

has a press button to fix the wheel on the bottom guide rail; that button should face up;

(fig 11)

12. Secure the handles to the doors. Slide the top door wheels into the top guide rail and

push the bottom wheels in the bottom guide rail by pressing down the button. Attach the

magnetic strips to the glass doors. Use the Phillips screwdriver #2 (do not use power

screwdriver) to adjust the upper wheels, make sure they move smoothly and the doors

close tight. Then attach the anti-water strips; (fig 12)

13. Seal with silicone on all the connections between the vertical profiles and the back

panel, bottom rail and tray, tray and back panel. Let it dry for 24 hours before moving

the cabin;

14. Connect the flexible hose to the foot massager and hand shower. Secure these two

items in place on the back panel. Secure the top shower head on the roof. Make sure all

the water connections are water tight;

15. Connect hot water to the red mark water inlet and cold water to the blue mark water

inlet. Connect the drain flexible pipe (1 ½” outlet) to the drain opening in the floor; (fig 13

& 14)

16. Do not move the cabin into the place until you check all the components for any leakage

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamLine Oceana Shower Cabin Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info