768190
36
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
8.0 MAINTENANCE
36 R699740 - DreamBee User Manual
LED Warning
If abnormality occurs in this unit during projection, the warning LED will light On, and the type of abnormality will be
indicated by a combination of indicators at the rear of this unit.
When the unit enters in Warning Mode, it will automatically stop projection and run the cooling fan for about
60 seconds.
Actions to be taken upon warning indications
No. OPERATING LED SIGNIFICATION
STANDBY/ON LAMP WARNING
1 - Light On - Lamp time exceeds 1900 hours.
2 - Light On - Lamp time exceeds 2000 hours and need
replacement.
3 - Blinking Light On Lamp error during startup.
4 - Blinking Light On Lamp error during projection.
5 - - Light On Microprocessor circuit error.
6 - - Light On Drive circuit error.
7 - Blinking Light On Lamp cover is removed.
8 - - Light On Internal temperature is too high.
9 - - Light On External temperature is too high.
10 - - Light On Cooling Fan speed error.
No. SIGNIFICATION ACTIONS TO BE TAKEN
1 Lamp time exceeds 1900 hours. Get prepared a new lamp for replacement.
2Lamp time exceeds 2000 hours and need
replacement. Replace the lamp with a new one, see “Procedure for
Lamp Replacement”, page 34.
3 Lamp error during startup. Turn ON the power again.
4 Lamp error during projection. Check that an impact shock has not occurred during
projection, then turn ON again.
5 Microprocessor circuit error. Turn ON the power again.
6 Drive circuit error. Turn ON the power again.
7 Lamp cover is removed. Check that the lamp unit and lamp cover are correctly
installed and turn ON the power.
8 Internal temperature is too high. Check that nothing is blocking the air inlets and leave
the unit until it cool down. Then turn ON the power.
9 External temperature is too high. Check that the external temperature is normal and
leave the unit until it cools down. After that, turn ON
the power again.
10 Cooling Fan speed error. Leave the unit until it cools down, then turn ON the
power again.
36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision DreamBee wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info