Bedienungsanleitung DreamVision Eos (Seite 21 von 48) (Englisch)

768191

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

pICTURE ADjUST

R699900 - Eos Series User Manual 21

User Name Edit

BACK

Name User 1

Clear All Clear OK

Exit

Select

Operate

Picture Adjust

SPACE

Select cursor Input cursor

Character list

a) Select the user name you want to edit from User 1 to User 5. Press [OK] to enter the edit mode.

b) The input cursor displays the place where the new character will be insert. It moves automatically as a

character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.

c) Press [BACK] to exit edit mode.

Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specic

character. All Clear: To delete all characters. OK: To save the current name, a save conrmation will appear.

8.3  AdvancedColorProle

Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional

sets of Picture Modes can be activated. Each set designated as THX and ISF proles have to be calibrated. Once

done, these proles are stored and displayed in the picture mode menu list but will not be modiable. Additionally

the Calibrator can certify his action by setting in the Information Menu his name or company name.

Color Management (TSL adjustments)

The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:

each primary, secondary colors can be independently calibrated to obtain a precise color balance in a snap.

Adjust the Red, Green, Blue, Yellow, Cyan, Magenta. Tints, their saturations and luminances and store them into

Custom proles.

8.4  Color Temperature

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Prole selected, this setting can be set to:

• Preset from warm colors 5500K, 6500K, 7500K up to 9300K, colder colors.

• Xenon 1 uses the Xenon lter and color compensation to reproduce a lm projector

• Xenon 2 uses the Xenon lter and color compensation to reproduce a digital cinema projector

• HDR10 Color temperature is suitable for viewing HDR10 content and the default setting is 6500K.

• HLG is suitable for viewing HDR with Hybrid Log contents and the default setting is 6500K.

• High Bright used for maximum brightness output.

• Custom 1 to 2 that can be used to adjust color temperature to specic environment.

A Custom setting allows a ne adjustment of a Color Temperature by selecting it in the Correction Value menu.

Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.

Accurate color temperature may require professional tools such as dedicated software and color-meter.

Wait at least 15 minutes after startup for the colors to stabilise before modifying the picture settings.

Picture modes Xenon 1 and Xenon 2 are exclusive to Eos 2 and Eos Signature models only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Eos Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info