768191
26
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
R699900 - Eos Series User Manual
INpUT SIGNAL
26
10.0 INPUT SIGNAL
10.1  Input Level
Sets the dynamic rang of the video input:
Auto: The input dynamic range is automatically detected and congured.
Standard: Force dynamic range to 16-235.
Enhance: Force dynamic range to 0-255.
Super White: Force dynamic range to 16-255.
10.2  Color Space
Sets the color space of the input signal.
Auto: The source color space is automatically detected and congured.
YCbCr(4:4:4): Set color space to YCbCr 4:4:4.
YCbCr(4:2:2): Set color space to YCbCr 4:2:2.
RGB: Set color space to RGB 4:4:4.
Use preferably a video source of 4K if available to obtain higher resolution and richer colors.
10.3  HDR Setting
HDR10 Auto Select
This projector can detect HDR10 video contents. This setting congures the projector behavior when such packets
are detected so it can automatically switches the “Picture Mode” to either “HDR10” or any other congurable
“User 1 to 6” Picture Mode when the active input is detected as HDR 10 content.
Set it to HDR10 to automatically switches “Picture Mode” to “HDR10” when receiving HDR10 packets.
Set it to User 1 up User 6 to automatically switches “Picture Mode” to desired User Mode when receiving
HDR10 packets.
Set to Off to prevent this unit to switch Picture Mode when receiving HDR10 packets
HLG Auto Select
This projector can detect Hybrid Log video contents. This setting congures the projector behavior when
such packets are detected so it can automatically switches the “Picture Mode” to either “HDR10” or any other
congurable “User 1 to 6” Picture Mode when the active input is detected as HDR 10 content.
Set it to HLG to automatically switches “Picture Mode” to “HLG” when receiving Hybrid Log packets.
Set it to User 1 up User 6 to automatically switches “Picture Mode” to desired User Mode when receiving HLG
packets.
Set to Off to prevent this unit to switch Picture Mode when receiving HLG packets
10.4  HDMI2 EDID
This setting changes the EDID information for HDMI 2 only to make it compatible with older HDMI sources. If this
unit is not able to display 1920 x 1080 or lower resolutions pictures, connect this source to HDMI 2 terminal and
change this setting to value B.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision Eos wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info