Bedienungsanleitung DreamVision Helios (Seite 22 von 44) (Englisch)

768192

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

R699870 - Helios User Manual

PICTURE ADjUST

6.2  AdvancedPictureMode

Dynamic CTRL

Expands dynamically the brightness range of a video source directly through the laser light source. Turn it Off,

set to Mode 1 for a low correction or to Mode 2 for stronger effect.

LD Power

Set the laser LED power used by the current Picture Prole. For standard viewing conditions, the LED power is

set to Mid. Depending on the screen size and the ambient light, you may set it to Low to obtain a dimmer image,

or to set it to High for a much brighter image.

Aperture

The lens is equipped with a variable electronic aperture. You can set the iris opening to a xed position, adjust to

the best aperture from partially closed (-15) to fully opened (0).

User Name Edit

You can edit the picture mode names User 1 to 6 using a maximum length of 10 characters. You can use alphabet

letters, numbers and symbols:

User Name Edit

BACK

Name User 1

Clear All Clear OK

Exit

Select

Operate

SPACE

Select cursor Input cursor

Character list

a) Select the user name you want to edit from User 1 to User 6. Press [OK] to enter the edit mode.

b) The input cursor displays the place where the new character will be insert. It moves automatically as a

character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.

c) Press [BACK] to exit edit mode.

Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specic

character.

All Clear: To delete all characters. OK: To save the current name, a save conrmation will appear.

6.3  AdvancedColorProle

Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional

Picture Modes can be activated, designated as THX bright and THX dark that have to be calibrated. Once done,

these proles are stored and displayed in the picture mode menu list but will not be modiable.

Color Management (TSL adjustments)

The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:

each primary, secondary colors can be independently calibrated to obtain a precise color balance in a snap.

Adjust the Red, Green, Blue, Yellow, Cyan, Magenta tints, their saturations and luminances and store them into

Custom proles. Available adjustments: Axis Position, Hue, Saturation and Brightness.

6.4  Color Temperature Presets

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Prole selected, this setting can be set to:

• Xenon 1 uses the Xenon lter and color compensation to reproduce a lm projector

• Xenon 2 uses the Xenon lter and color compensation to reproduce a digital cinema projector

• Preset: from 5500K / warm colors, 6500K, 7500K and 9300K / colder colors.

• High Bright used for maximum brightness output available.

• HDR saturated colors that matches HDR standards.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Helios Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info