768192
33
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
INFORMATION MENU
R699870 - Helios User Manual 33
13.0 INFORMATION MENU
Input Terminal
Displays the active video input.
Input Source
Displays the type of the current video input signal.
Resolution
If the active input is PC input, its resolution is displayed.
H. and V. Frequency
In the case of PC signal, the horizontal and vertical frequencies are displayed.
Color Depth
Displays the color bit depth of the input video signal.
Colorimetry
Displays the color space and color depth of the input signal.
HDR
Displays if the source uses the HDR encoding or not.
Light source time
Displays the accumulated hours of usage of the lamp.
14.0 CINEMASCOPE SETUPS
14.1  LensZoomorStaticCinemascopekit
The centralizes the controls and automation commands for a unique, versatile and unexpectedly simple to
operate 2.35:1 theatre experience using Lens Zoom or the Static Cinemascope kit.
Up to 10 lens position memories when using Installation Mode 1 up to Mode 10.
Integrated Constant Image Width (CIW) scaler using anamorphic mode A and mode B.
Dedicated commands to control the Static Cinemascope kit and picture size on a 2.37:1 screen.
14.2  CinemascopesetupusingthelensZoom
Select “Menu => Installation => Mode 1”
Zoom in, until the left and right borders of the picture ts the 2.37:1 screen borders. Save the lens position in the
Installation Mode 1. You can also edit the memory 1 name to “Cinemascope”.
Select “Menu => Installation => Mode 2”
Switch the current Installation Mode from Mode 1 to Mode 2. Make sure to project a 16:9 picture, zoom out until
the picture top and bottom t the top and bottom of the screen. Adjust the focus and offset if required, then save
this position into the Installation Mode 2. You can additionally edit the memory name to “Standard”.
Switch format using the Remote Control Unit.
You can now switch between Cinemascope and standard formats easily by using the Installation [Mode] buttons
on the RCU and selecting the lens conguration according to the source format.
You can access directly on the remote control unit (RCU) only to the 3 rst Installation Modes. If you need
to access to more Modes, you must use the main Menu or access them through automation.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für DreamVision Helios wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info