Bedienungsanleitung DreamVision Siglos plus (Seite 20 von 44) (Englisch)

768204

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

R699860 - Siglos Plus User Manual

PICTURE ADjUST

7.4  Color Temperature

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Profile selected, this setting can be set to:

• Preset: from 5500K / warm colors, up to 9300K / cold colors.

• Xenon1(*) uses the Xenon filter and color compensation to reproduce a film projector

• Xenon2(*) uses the Xenon filter and color compensation to reproduce a digital cinema projector

• Xenon3(*) same as Xenon2, but within a cooler temperature than Xenon2 setting.

• High Bright used for maximum brightness output available.

• Custom1, Custom2 and Custom3 can be used to adjust color temperature to specific environment.

A Custom setting allows a fine adjustment of a Color Temperature by selecting it in the Correction Value menu.

Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.

Accurate color temperature may require professional tools such as dedicated software and colormeter.

Wait at least 15 minutes after startup before modifying the picture settings.

(*) Xenon Modes are exclusive to Siglos+ 2&3 models.

7.5  Advanced Color Temperature

When selecting a Color temperature, you can manually set the Gains and Offsets of each primary color: red,

green and blue to finely adjust the color balance.

7.6  Gamma

Gamma is the relationship between the color values of the data and the color values displayed. The Gamma

coefficient makes it possible to adjust the brightness of the midtones only without affecting the very bright and

very dark areas. If gamma is set too high, middle tones appear too dark. If it’s set too low, middle tones appear

too light.

Depending on the current active Picture mode, the Gamma setting can be set to:

• Numeric value from 1.8 up to 2.6

• Normal: Standard setting for normal viewing.

• A: Gamma curve that put more emphasis on the brightness compared to the Normal setting.

• B: more emphasis on the contrast compared to the Normal setting.

• C: Places more emphasis on the gradation compared to the Normal setting.

• D: Gamma suitable for viewing HDR (High Dynamic Range) content

• Custom1 to Custom3: fine tune the gamma setting according to the user’s preference.

• NB: when Color Profile is set to x.v.Color, gamma setting is fixed to Normal.

Additional Gamma settings when Film Color Profile is selected (Siglos+ 2&3):

• Film1: standard gamma

• Film2: slightly more contrasted gamma

7.7  Advanced Gamma

Correction Value

The Custom data can be set to a correction value: a numeric value that will act as a gamma coefficient between

1.8 and 2.6, Normal, A, B, C, D, 1.8-2.6 or Import.

Color Selection

Select the color to which the Picture Tone, Dark / Bright Level settings would apply. Choose between White, Red,

Green and Blue.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Siglos plus Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info