Bedienungsanleitung DreamVision Siglos Ultra (Seite 20 von 44) (Englisch)

768198

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

R699880 - Siglos Ultra Series User Manual

PICTURE ADjUST

Color Management (TSL adjustments)

The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:

each primary, secondary colors can be independently calibrated to obtain a precise color balance in a snap.

Adjust the Red, Green, Blue, Yellow, Cyan, Magenta.Tints, their saturations and luminances and store them into

Custom profiles.

7.4  Color Temperature

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Profile selected, this setting can be set to:

• Preset from warm colors 5500K, 6500K, 7500K up to 9300K, colder colors.

• Xenon 1(*) uses the Xenon filter and color compensation to reproduce a film projector

• Xenon 2(*) uses the Xenon filter and color compensation to reproduce a digital cinema projector

• Xenon 3(*) same as Xenon 2, but within a cooler temperature than Xenon 2 setting.

• High Bright used for maximum brightness output available.

• Custom 1 to 3 that can be used to adjust color temperature to specific environment.

A Custom setting allows a fine adjustment of a Color Temperature by selecting it in the Correction Value menu.

Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.

Accurate color temperature may require professional tools such as dedicated software and color-meter.

Wait at least 15 minutes after startup before modifying the picture settings.

(*) Xenon Modes are exclusive to Siglos 2&3 Ultra models.

7.5  Advanced Color Temperature

When selecting a Color temperature, you can manually set the Gains and Offsets of each primary color: red,

green and blue to finely adjust the color balance.

7.6  Gamma

Gamma is the relationship between the color values of the data and the color values displayed. The Gamma

coefficient makes it possible to adjust the brightness of the mid-tones only without affecting the very bright and

very dark areas. If gamma is set too high, middle tones appear too dark. If it’s set too low, middle tones appear

too light.

Depending on the current active Picture mode, the Gamma setting can be set to:

• Numeric value from 1.8 up to 2.6

• Normal: Standard setting for normal viewing.

• A: Gamma curve that put more emphasis on the gradation compared to the Normal setting.

• B: more emphasis on the contrast compared to the Normal setting.

• C: Gamma C is brighter compared to the Normal setting.

• HDR (Hybrid Log): for viewing Broadcast HDR (High Dynamic Range) such as BBC or NHK TV programs.

• HDR (ST.2084): dedicated for viewing HDR (High Dynamic Range) contents such as UHD Bluray Discs.

• Custom 1 to Custom 3: fine tune the gamma setting according to the user’s preference.

• NB: when Color Profile is set to x.v.Color, gamma setting is fixed to Normal.

Additional Gamma settings when Film Color Profile is selected (Siglos 2&3 Ultra):

• Film1: standard gamma.

• Film2: slightly enhances the darkest areas of the picture.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Siglos Ultra Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info