Bedienungsanleitung DreamVision Siglos X-TRA (Seite 6 von 44) (Englisch)

768203

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

R699890 - Siglos X-tra Series User Manual

SAFETY INSTRUCTIONS

Please read these Important Safeguards carefully before use.

• All the safety and operating instructions should be read before the product is operated.

• All warnings on the product and in the operating instructions should be adhered to.

• All operating instructions should be followed.

• Place the projector near a wall outlet where the plug can be easily unplugged.

• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

• Do not use attachments not recommended by the product manufacturer as they may be hazardous.

• Do not use this product near water. Do not use immediately after moving from a low temperature to high

temperature, as this causes condensation, which may result in re, electric shock, or other hazards.

• Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury

to a child or adult, and serious damage to the product. The product should be mounted according to the

manufacturer’s instructions, and should use a mount recommended by the manufacturer.

• When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven

surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury

to the operator.

Slots and openings are provided for ventilation must not be blocked or covered. Do not place this unit

on a bed, sofa, rug or other similar surface.

• This product should be operated only with the type of power source indicated on the label. If you are not sure

of the type of power supply to your home, consult your product dealer or local power company.

• This product is equipped with a three-wire plug. This plug will t only into a grounded power outlet. If you are

unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the

safety purpose of the grounded plug.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they

exit from the product.

• For added protection of this product during a lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to

the product due to lightning and power line surges.

• Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can

result in a risk of re or electric shock.

• Never push objects of any kind into this product through openings as they may touch dangerous voltage

points or short out parts that could result in a re or electric shock. Never spill liquid of any kind on the product.

• Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous

voltages and other hazards. Refer all service to qualied service personnel.

• Unplug this product from the wall outlet and refer service to qualied service personnel under the following

conditions:

a) When the power supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen on the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating instructions. Adjust only those controls

that are covered by the Operation Manual, as an improper adjustment of controls may result in damage

and will often require extensive work by a qualied technician to restore the product to normal operation.

e) If the product has been dropped or damaged in any way.

f) When the product exhibits a distinct change in performance - this indicates a need for service.

• When replacement parts are required, be sure the service technician has used replacement parts specied

by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in

re, electric shock, or other hazards.

• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks

to determine that the product is in proper operating condition.

• The product should be placed more than one foot away from heat sources such as radiators, heat registers,

stoves, and other products (including ampliers) that produce heat.

• When connecting other products such as VCR’s, and personal computers, you should turn off the power of

this product for protection against electric shock.

• Do not place combustible behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas

lighters that present special hazards when over heated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Siglos X-TRA Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info