Bedienungsanleitung DreamVision Siglos X-TRA (Seite 19 von 44) (Englisch)

768203

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PICTURE ADjUST

R699890 - Siglos X-tra Series User Manual 19

• Reference color prole is used to reproduce faithfully the source colors.

• THX color prole is reserved for the THX picture modes.

• x.v.Color matches the color space of x.v.Color standard.

x.v.Color inputs may be incorrectly decoded with the picture prole presets. To obtain the correct colors,

set the Picture mode to a User picture mode” and select x.v.Color in the “Color Prole” selection.

The User picture modes can be renamed to any more convenient name.

7.2  Advanced Picture Mode

Clear Black

Smooth out the black areas to obtain clear zone by eliminating electronic white noise and enhancing the brightness

to obtain a more contrasted picture. Turn it Off or set the correction to Low for a mild effect or High for a strong

effect.

Lamp Power

Set the lamp power used by the current Picture Prole. For standard viewing conditions, the lamp power is set to

Low. To obtain a brighter image, set it to High but this setting may cause the lamp to darken faster.

To avoid any damage to the lamp, you shouldn’t change the lamp power within 90 seconds from the

projector startup or 60 seconds after lamp power change.

Lens Aperture and High Contrast Images

The lens is equipped with a variable electronic aperture. This function is used with a real time analysis of the video

picture projected that optically adjusts the light output depending on the viewing conditions by controlling the

aperture dynamically. Thanks to sensitive and perfectly controlled adjustments, the contrast image is drastically

boosted. When set to Auto 1, this setting makes the iris to automatically set to the optimal opening to enhance

the picture contrast. The Auto 2 setting, the result obtained is altered so that the gradation is more visible. The

Manual setting sets the iris to a xed position, adjust the aperture from partially closed (-15) to fully opened (0).

User Name Edit

You can edit the picture modes names User 1 to User 5 using a maximum length of 10 characters. You can use

alphabet letters, numbers and symbols:

User Name Edit

BACK

Name User 1

Clear All Clear OK

Exit

Select

Operate

Picture Adjust

SPACE

Select cursor Input cursor

Character list

a) Select the user name you want to edit from User 1 to User 5. Press [OK] to enter the edit mode.

b) The input cursor displays the place where the new character will be insert. It moves automatically as a

character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.

c) Press [BACK] to exit edit mode.

Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specic

character. All Clear: To delete all characters. OK: To save the current name, a save conrmation will appear.

7.3  AdvancedColorProle

Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional

sets of Picture Modes can be activated. Each set designated as THX and ISF proles have to be calibrated. Once

done, these proles are stored and displayed in the picture mode menu list but will not be modiable. Additionally

the Calibrator can certify his action by setting in the Information Menu his name or company name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Siglos X-TRA Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info