Bedienungsanleitung DreamVision Siglos (Seite 19 von 44) (Englisch)

768195

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

PICTURE ADjUST

R699850 - Siglos User Manual 19

There are 12 Color proles for 2D inputs and 7 for 3D inputs, depending on the selected picture mode, you may

choose an available color prole preset:

• Film1 available with Film Picture Prole, uses the Xenon lter and adjusted to Eastman Kodak lm tone

• Film2 available with Film Picture Prole, uses the Xenon lter and adjusted to Fujilm lm tone.

• Film3 available with Film Picture Prole, uses the Xenon lter and adjusted to Technicolor lm tone.

• Standard will bring rich and saturated colors found in HDTV, available with almost any selected Picture Mode.

• Cinema1 available with Cinema Picture Prole and adjusted to HDTV standards

• Cinema2 available with Cinema Picture Prole and adjusted to DCI standards.

• Anime1 best suited to Hollywood animes.

• Anime2 best suited to Japanese animes.

• Video color prole is best suited to TV and Sport programs.

• AdobeRGB color prole adjusted to Adobe RGB standard.

• Stage best suited to live concert.

• x.v.Color matches the color space of x.v.Color standard.

7.2  Advanced Picture Mode

Clear Black

Smooth out the black areas to obtain clear zone by eliminating electronic white noise in these areas. Turn it Off

or set the correction to Low for a mild effect or High for a strong effect.

Lamp Power

Set the lamp power used by the current Picture Prole:

Low: lamp is set to 180W

High: lamp is set to 230W.

To avoid any damage to the lamp, you shouldn’t change the lamp power within 90 seconds from the

projector startup or 60 seconds after lamp power change.

Lens Aperture

The lens is equipped with a variable electronic aperture. This function is used with a real time analysis of the

video picture projected that optically adjusts the light output depending on the viewing conditions by controlling

the aperture dynamically: when set to Auto 1, the iris will automatically be set to the optimal opening. Auto 2, the

curve is altered so that the gradation is more visible. The Manual setting lock the iris to a xed position, adjust to

the best aperture from partially closed (-15) to fully opened (0).

User Name Edit

You can edit the picture modes names User1 to 4 using a maximum length of 10 characters. You can use

alphabet letters, numbers and symbols:

User Name Edit

BACK

Name User 1

Clear All Clear OK

Exit

Select

Operate

Picture Adjust

SPACE

Select cursor Input cursor

Character list

a) Select the user name you want to edit from User1 to User5. Press [OK] to enter the edit mode.

b) The input cursor displays the place where the new character will be insert. It moves automatically as a

character is selected. Use [UP], [DOWN], [LEFT] or [RIGHT] to select a character and press [OK] to insert.

c) Press [BACK] to exit edit mode.

Clear: To delete a character: Move the cursor to the desired location and press [OK] to delete the specic

character.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Siglos Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info