Bedienungsanleitung DreamVision Star Light (Seite 25 von 48) (Englisch)

768201

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

6.0 MENU AND PICTURE SETTING

R699780 - Starlight User Manual 25

• Normal: Standard tones

• Gamma A: rich dark tones.

• Gamma B: for ﬁlm and movie projection.

• Gamma C: for ﬁlm and movie projection with more detailed blacks than setting B.

• Gamma D: this setting is recommended for bright midtones and Computer like projection.

• Custom1

• Custom2

• Custom3

The Custom data can be set to:

• Correction Value: a unique value that will act as a gamma coefﬁcient between 1.8 and 2.6.

• Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.

• Copy: copy the adjusted values to temporal memory.

•Paste: paste values stored in memory to current proﬁle.

• Reset: reset to the default 2.2 gamma coefﬁcient.

Gamma Adjustment can be copied from all modes. Paste can only be used for Custom modes.

Advanced 6.2.0.1 Sharpness

The Sharpness function is used to adjust the image sharpness of the picture. Adjust

the Sharpness value between 0 (soft) and 100 (sharper).

6.2.0.2 Detail Enhancement

Detail Enhancement function is used to improve the picture quality. You can set it

from -50 to 50.

6.2.0.3 Noise Reduction (SD video only)

DNR: Digital Noise Reduction. You can set it from 0 up to 16 to reduce the image

noise.

MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise on

the picture, generally found in compressed digital video signals such as television

broadcast or encoded movies. Adjust the MNR value from 0 up to 16 to reduce the

typical broadcast picture mosquito noise

BNR: Block Noise Reduction uses a large portion of the picture to reduce the digital

noise, this ensures a higher quality ﬁlter. Adjust the BNR value to On or Off.

6.2.0.4 CTI (SD video only)

Color Transition Improvement. Set it to Off, Low, Middle or High to reduce the color

smear (color contour correction). Caution: this function may alter the original picture

chrominance.

6.2.0.5 Color Management (TSL adjustments for StarLight2 only)

The Color Management gives the installer an unique calibration ease with the

integrated Color Adjustment menu: each primary and secondary color can be

independently calibrated to obtain a precise color balance in a snap.

Adjust the Red, Green, Blue, Yellow, Cyan and Magenta Tints, Saturations and

Luminances and store them into Custom1, Custom2 or Custom3 proﬁles.

6.2.0.6 Crystal Motion Drive (120Hz)

The Crystal Motion function uses a 120Hz video processing to render a smooth and

clear motion for movies shot at 24Hz or HD movies at 60Hz. Set the correct level

between low and high for 1080p24Hz movies or Film mode input to obtain a clear

image.

Lens Aperture

The lens is equipped with a variable electronic aperture. This function is used to optically adjust the light output

depending on the viewing conditions and the light ambiance. Adjust from the correct aperture from partially closed

to fully opened.

Reset

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Star Light Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info