Bedienungsanleitung DreamVision Yunzi plus (Seite 20 von 44) (Englisch)

768199

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

R699840 - Yunzi+ User Manual

PICTURE ADjUST

All Clear: To delete all characters. OK: To save the current name, a save conrmation will appear.

7.3  AdvancedColorProle

Expert Calibration is accessed only by using a programmable IR-RCU, RS-232C or LAN control. Two additional

sets of Picture Modes can be activated. Each set designated as THX and ISF proles have to be calibrated. Once

done, these proles are stored and displayed in the picture mode menu list but will not be modiable. Additionally

the Calibrator can certify his action by setting in the Information Menu his name or company name.

Color Management (TSL adjustments)

The Color Management gives the installer an unique calibration ease with the integrated Color Adjustment menu:

each primary, secondary colors and orange can be independently calibrated to obtain a precise color balance in

a snap. Adjust the Red, Green, Blue, Yellow, Cyan, Magenta and Orange Tints, their saturations and luminances

and store them into Custom proles.

7.4  Color Temperature

Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer

ambiance (more yellow/red) while high color temperature implies a colder light (more blue). Depending on the

Picture Prole selected, this setting can be set to:

• Preset: from 5500K / warm colors, up to 9500K / cold colors in steps of 500K.

• Xenon1(*) uses the Xenon lter and color compensation to reproduce a lm projector

• Xenon2(*) uses the Xenon lter and color compensation to reproduce a digital cinema projector

• Xenon3(*) same as Xenon2, but within a cooler temperature.

• High Bright used for maximum brightness output available.

• Custom1, Custom2 and Custom3 can be used to adjust color temperature to specic environment.

A Custom setting allows a ne adjustment of a Color Temperature by selecting it in the Correction Value menu.

Adjust the Gain values (bright part) and Offset values (dark part) for each color Red, Green and Blue.

Accurate color temperature may require professional tools such as dedicated software and colormeter.

Wait at least 15 minutes after startup before modifying the picture settings.

(*) Xenon Modes are exclusive to Yunzi+2&3 models.

7.5  Advanced Color Temperature

When selecting a Color temperature, you can set the Gains and Offsets of each primary color: red, green and

blue to nely adjust the color balance.

7.6  Gamma

Gamma is the relationship between the color values of the data and the color values displayed. The Gamma

coefcient makes it possible to adjust the brightness of the midtones only without affecting the very bright and

very dark areas. If gamma is set too high, middle tones appear too dark. If it’s set too low, middle tones appear

too light.

Depending on the current active Picture mode, the Gamma setting can be set to:

• Normal: Standard setting for normal viewing.

• Brightness Priority: Places more emphasis on the brightness than the Normal setting.

• Contrast Priority: Places more emphasis on the contrast than the Normal setting.

• Gradation Priority: Places more emphasis on the gradation than the Normal setting.

• Custom1 to Custom3: ne tune the gamma setting according to the user’s preference.

• NB: when Color Prole is set to x.v.Color, gamma setting is xed to Normal.

AdditionalGammasettingswhenFilmColorProleisselected(Yunzi+2&3):

• Film1: standard gamma

• Film2: slightly more contrasted gamma

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DreamVision Yunzi plus Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info