Bedienungsanleitung Dremel 10.8V Lithium-ion (Seite 14 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

488606

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ORIGINAL INSTRUCTIONS

WARNING

READ ALL INSTRUCTIONS.

Failure to follow all instructions

listed below may result in electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below refers to

your cordless power tool.

SAVE THESE INSTRUCTIONS

1. WORK AREA

a. Keep work area clean and well lit. Cluttered and dark areas

invite accidents.

b. Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2. ELECTRICAL SAFETY

a. Charger plug must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and matching

outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the charger. Keep cord away from

heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e. When using a charger outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f. Do not use the charger when the cord or plug are damaged;

the cord or plug should be replaced immediately at a

certiﬁed Dremel Service Centre.

3. PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a power tool

while you are tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention while operating

power tools may result in serious personal injury.

Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Carrying power tools with your

finger on the switch invites accidents.

d. Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating

part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep

your hair, clothing and gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of these devices can reduce dust related

hazards.

4. POWER TOOL USE AND CARE

a. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the job

better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c. Turn the power tool off before making any adjustments,

changing accessories, or storing. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

d. Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of

moving parts, breakage of parts and any other condition that

may affect the power tools operation. If damaged, have the

power tool repaired before use. Many accidents are caused

by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions and in the manner

intended for the particular type of power tool, taking

into account the working conditions and the work to be

performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

5. SERVICE

a. Have your power tool serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that

the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR ALL

OPERATIONS

SAFETY WARNINGS THAT ARE COMMON

FOR GRINDING, SANDING, WIRE BRUSHING,

POLISHING AND ABRASIVE CUTTING OFF

OPERATIONS

a. This power tool is intended to function as a grinder, sander,

wire brush, polisher or cut-off tool. Read all safety warnings,

instructions, illustrations and speciﬁcations provided with

Dremel 10.8V Lithium-ion Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info