Bedienungsanleitung Dremel 750 (Seite 18 von 68) (Englisch, Französisch, Spanisch)

25131

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Page 18

Aluminum Oxide Grinding Stones (orange/brown)

Round, pointed, flat — you name the shape and there is

one available in this category. These are made of alu-

minum oxide and cover virtually every possible kind of

grinding application. Use them for sharpening lawn

mower blades, screwdriver tips, knives, scissors, chis-

els and other cutting tools. Use to remove flash from

metal castings, deburring any metal after cutting,

smoothing welded joints, grinding off rivets and remov-

ing rust. In machine shops, high speed drills and cutters

normally are ground with aluminum oxide wheels.

Silicon Carbide Grinding Stones (green/gray)

Tougher than aluminum oxide points, these are made

especially for use on hard materials such as glass and

ceramics. Typical uses might be the removal of stilt

marks and excess glaze on ceramics and engraving on

glass.

Diamond Wheel Points

Excellent for fine detail work on wood, jade, ceramic,

glass and other hard material. Bits are covered with

diamond particles. 3/32" shanks.

Polishing Accessories

These include an impregnated polishing point and an

impregnated polishing wheel for bringing metal sur-

faces to smooth finish; a felt polishing tip and felt

polishing wheel, and cloth polishing wheel, all used for

polishing plastics, metals, jewelry and small parts. Also

included in this group is a polishing compound (No.

421) for use with the felt and cloth polishers.

Polishing points make a very smooth surface, but a

high luster is obtained using felt or cloth wheels and

polishing compound.

No polishing compound is needed when using the

425 Polishing Wheel or 427 Polishing point.

Aluminum Oxide Abrasive Wheels

Use to remove paint, deburr metal, polish stainless

steel and other metals. Available in fine and medium

grits.

Sanding Accessories

Sanding discs in fine, medium and coarse grades are

made to fit mandrel No. 402. They can be used for

nearly any small sanding job you might have, from

model making to fine furniture finishing. In addition,

there is the drum sander, a tiny drum which fits into the

Rotary Tool and makes it possible to shape wood,

smooth fiberglass, sand inside curves and other diffi-

cult places, and other sanding jobs. You replace the

sanding bands on the drum as they become worn and

lose their grit. Bands come in fine and coarse grades.

Wire Brushes

Three different shapes of wire brushes are available.

For best results wire brushes should be used at

speeds not greater than 15,000 RPM. The three

shapes come in three different materials: stainless

steel, brass and carbon wire. The stainless steel per-

form well on pewter, aluminum, stainless steel, and

other metals, without leaving "after-rust". Brass brush-

es are non sparking, and softer than steel; making

them good for use on soft metal like gold, cooper and

brass. The carbon wire brushes are good for general

purpose cleaning.

DM 2610925743 02-05 2/7/05 9:34 AM Page 18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel 750 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info