Bedienungsanleitung Dremel Driver (Seite 6 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

488611

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

BATTERY TOOL USE AND CARE

a. Recharge only with the charger speciﬁ ed by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of ﬁ re when used with

another battery pack.

b. Use power tools only with speciﬁ cally designated battery

packs. Use of any other battery packs may create a risk of

injury and ﬁ re.

c. When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws

or other small metal objects, that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a ﬁ re.

d. Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, ﬂ ush

with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or

burns.

SERVICE

Have your power tool serviced by a qualiﬁ ed repair person using

only identical replacement parts. This will ensure that the safety

of the tool is maintained.

SAFETY INSTRUCTIONS FOR

CORDLESS SCREWDRIVERS

a. Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the charger (chargers

with a rating of 230V or 240V can also be connected to a

220V supply).

b. Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before you

start working.

c. In case of electrical or mechanical malfunction, immediately

switch off the power tool or unplug the charger from the

power source.

d. Dremel can assure ﬂ awless functioning of the tool only

when original accessories are used.

e. This tool should not be used by people under the age of 16.

f. Be careful not to drive into areas where electrical wires may

be contacted.

g. Ensure that the trigger lock is in the middle position before

making any adjustments or changing accessories as well as

when carrying or storing the tool.

CHARGING BATTERIES

a. Charge battery only with the charger that is supplied with

the tool.

b. Do not expose the tool/charger to rain.

c. Never charge the battery outdoors.

d. Store tool/charger in locations where temperature will not

exceed 40 °C or drop below 0 °C.

e. Batteries will explode in ﬁ re, so do not burn batteries for any

reason.

f. When damaged, and under extreme usage and temperature

conditions, batteries may start to leak.

- If liquid comes into contact with the skin, wash quickly

with soap and water, then with lemon juice or vinegar.

- If liquid gets into the eyes, ﬂ ush eyes with clean water

for a minimum of 10 minutes and immediately seek

medical attention.

g. Do not use the charger when the cord or plug are damaged;

the cord or plug should be replaced immediately at a

certiﬁ ed Dremel Service Centre.

h. Do not disassemble the charger or tool.

ENVIRONMENT

DISPOSAL

The tool, accessories and packaging should be sorted for

environmentally-friendly recycling.

Do not dispose of electric tools, batteries, accessories and

packaging together with household waste material (only for EU

countries).

- In observance of European Directive 2002/96/EC on waste

of electric and electronic equipment and its implementation

in accordance with national law, electric tools that have

reached the end of their life must be collected separately

and returned to an environmentally compatible recycling

facility.

- The

symbol will remind you of this when the need for

disposal occurs.

BATTERY DISPOSAL

WARNING

DO NOT ATTEMPT TO DISASSEMBLE THE

BATTERY OR REMOVE ANY COMPONENT

PROJECTING FROM THE BATTERY TERMINALS. FIRE OR INJURY

MAY RESULT. PRIOR TO DISPOSAL, PROTECT EXPOSED

TERMINALS.

SPECIFICATIONS

GENERAL SPECIFICATIONS

Cordless Driver

Model number . . . . . . . . . . . 1120

Voltage rating . . . . . . . . . . . . 7.2 V

No-load speed . . . . . . . . . . . no 0-300/min

Bit holder . . . . . . . . . . . . . . . 1/4" Hex/shank

Maximum screw size . . . . . . 1/4" (6 mm)

Soft torque . . . . . . . . . . . . . . 5.50 Nm

Hard torque . . . . . . . . . . . . . 8.24 Nm

Charger

Model number . . . . . . . . . . . 866

Voltage rating . . . . . . . . . . . . 230 V

Charge time . . . . . . . . . . . . . 5 Hrs.

2610398910-Driver-0807.indb 62610398910-Driver-0807.indb 6 31-7-2008 12:37:1031-7-2008 12:37:10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel Driver Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info