Bedienungsanleitung Dremel Model MM40 (Seite 9 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Schwedisch, Norwegisch, Finnisch)

488589

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

of moving parts, breakage of parts and any other

condition that may affect the power tools operation. If

damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool bits etc., in

accordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

BATTERY TOOL USE AND CARE

a. Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when used with another

battery pack.

b. Use power tools only with specifically designated battery

packs. Use of any other battery packs may create a risk of

injury and fire.

c. When battery pack is not in use, keep it away from other

metal objects like paper clips, coins, keys, nails, screws,

or other small metal objects that can make a connection

from one terminal to another. Shorting the battery terminals

together may cause burns or a fire.

d. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally occurs,

flush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause

irritation or burns.

SERVICE

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

MACHINE-SPECIFIC SAFETY

WARNINGS

a. Use the machine only for dry sanding. Penetration of water

into the machine increases the risk of an electric shock.

b. Keep hands away from the sawing range. Do not reach

under the workpiece. Contact with the saw blade can lead

to injuries.

c. Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to

fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property damage

or may cause an electric shock.

d. When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

e. Secure the workpiece. A workpiece clamped with clamping

devices or in a vice is held more secure than by hand.

f. Keep your workplace clean. Blends of materials are

particularly dangerous. Dust from light alloys can burn or

explode.

g. Avoid unintentional switching on. Ensure the On/Off

switch is in the off position before inserting battery pack.

Carrying the power tool with your finger on the On/Off switch

or inserting the battery pack into power tools that have the

switch on invites accidents.

h. Wear protective gloves when changing application tools/

accessories. Application tools/accessories become hot after

prolonged usage.

i. Do not scrape wetted materials (e. g. wallpaper) or on

moist surfaces. Penetration of water into the machine

increases the risk of an electric shock.

j. Do not treat the surface to be worked with solvent-

containing fluids. Materials being warmed up by the

scraping can cause toxic vapours to develop.

k. Exercise extreme caution when handling the scraper. The

accessory is very sharp; danger of injury.

WARNING

DO NOT WORK WITH MATERIALS

CONTAINING ASBESTOS (ASBESTOS IS

CONSIDERED CARCINOGENIC).

WARNING

TAKE PROTECTIVE MEASURES WHEN

DURING WORK DUST CAN DEVELOP

THAT IS HARMFUL TO ONE’S HEALTH, COMBUSTIBLE OR

EXPLOSIVE (SOME DUSTS ARE CONSIDERED CARCINOGENIC);

WEAR A DUST MASK AND WORK WITH DUST/ CHIP

EXTRACTION WHEN CONNECTABLE.

ENVIRONMENT

DISPOSAL

The machine, accessories and packaging should be sorted for

environmental-friendly recycling.

ONLY FOR EUROPEAN COUNTRIES

Do not dispose of power tools into household waste!

According the European Guideline 2002/96/EC for

Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that are

no longer usable must be collected separately and

disposed of in an environmentally correct manner.

SPECIFICATIONS

GENERAL SPECIFICATIONS

Dremel Multi-Max Corded Oscillating Multi-Tool

Model MM20

Voltage Rating: 220V-240V ~ 50/60Hz

Wattage Rating: 250W

No Load Speed: n(o) 10000-21000 min-1

Oscillation Angle, left/right: 1,5°

Weight: 1.35 kg

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dremel Model MM40 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info