Bedienungsanleitung Drift GHOST-S (Seite 20 von 25) (Englisch)

569668

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Conserving Battery

The Ghost-S comes with a rechargeable 1700mAh Lithium-Ion battery, allowing

you to record continuously for hours between charges. However, sometimes you

may ﬁnd yourself in a location without a power outlet to charge your camera. If

you’re outside, cold conditions can drain battery power at a faster rate than usual.

Fortunately, the Ghost-S comes with a number of features to conserve the battery

life. These can all be found in the Camera Settings menu.

LCD O

The camera’s LCD screen consumes power, so one of the best ways to

extend battery life is to use the ‘LCD O’ feature. By default, LCD screen will

automatically power o after 20 seconds (the time interval can be chosen when

selecting ‘LCD O’ from the Camera Settings menu).

The camera will still function as normal when the screen is o: in Live Preview,

the camera is ready to record at any time. If recording is in progress, the camera

will continue to record. The remote can also be used while the screen is o. The

screen can be turned back on again at any time by pressing any button.

LCD Brightness

The LCD screen is backlit, this too consumes power. It is possible to reduce the

intensity of this light by adjusting the ‘LCD Brightness’ setting in the Camera

Settings menu—you will notice a slight increase in battery life if you use a lower

brightness setting.

Camera Auto O

It is possible to set the camera to power o entirely when no buttons are pressed

for a number of minutes (the duration can be chosen selecting ‘Camera Auto

O’ from the Camera Settings menu). This can be useful to reduce battery

consumption if the camera is accidently left powered on.

! The camera will not power o while recording is in progress. However,

once the camera has powered o, you will need to power it on again before

capturing any footage.

! The remote control will not operate the camera while the unit is powered o.

Using Dierent Video Resolutions

Bigger resolutions as well as higher frame rates all contribute to more ‘work’ for

the processor; this means more battery power is required to process the

work. If you are shooting video and do not require full 1080p (for instance for

easy internet sharing) try using a lower resolution and your battery life will

increase accordingly. For example, in 1080p at 30fps you can expect 3h 30min

versus 4h 20min in WVGA at 30fps.

Spare batteries

You can also charge a second battery

before you set out and then swap it

when the ﬁrst is empty. Spare 1700mAh

Ghost batteries and Power Packs are

available from ocial Drift retailers.

Please visit driftinnovation.com for more

information and where to purchase.

! Always change the battery in a

clean, dry and safe environment.

Getting camera batteries wet will

damage them and may result in

injury. For your own safety, never

use damaged batteries.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drift GHOST-S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Drift GHOST-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info