Bedienungsanleitung Drift HD Ghost (Seite 15 von 22) (Englisch)

595066

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

shot setup

Fixing the camera to the Universal Clip

1. Align the screw of the universal clip with the thread on the underside of the

camera body

2. Twist the screw thread in a clockwise direction

3. As the universal clip tightens against the body of the camera, rotate the

camera to provide the desired angle of attachment, holding the clip in place

4. Tighten the screw on the universal clip until it ﬁts ﬁrmly against the camera

body

Closing the rear hatch

1. Ensure the directional arrow “up” indicator is pointing up towards the buttons

2. Use the notch in the universal clip to tighten the screw on the rear hatch

! Failure to completely seal the rear hatch for water-based applications will result

in permanent damage to the camera (see p3).

Mounting the camera to a Drift mount

Included with the camera are several Drift mounts which will help you ﬁnd the

shot you want.

Mounting the camera on goggles

1. Attach the Goggle Mount to the strap of your goggles

2. Slide the camera (with universal clip attached) into the mount until the two

arms on the clip click into place

Mounting the camera on a helmet

1. Position the Curved Surface Mount against your helmet to ﬁnd the optimum

mounting position

2. Ensure the mounting surface is clean, dry and free of oil and dust

3. Remove the cover of the mount’s 3M adhesive and ﬁx the mount to the

helmet—allow 24 hours to cure

4. Slide the camera (with universal clip attached) into the mount until the two

arms on the clip click into place

Fixing the camera to the standard ¼” thread

Thread the camera onto a tripod, or any other mount with a standard camera

thread, turning the camera body on the thread clockwise to secure.

! However you choose to mount your camera, ensure that the camera is ﬁtted

ﬁrmly to reduce the risk of losing it. Give it a tug before you set out.

Lens Rotation

In order to maximise your mounting

options, the camera lens is rotatable

through 300°, allowing for the perfect

shot from even the most awkward of

positions.

Whilst holding the camera body in

one hand, use the index ﬁnger and

thumb of the other hand to hold the

camera lens ﬁrmly, then twist the

lens to the desired angle. The arrow

indicator above the lens indicates ‘up’

and corresponds with the top of the

display in Live Preview.

! Be sure to rotate the lens back to

the 0° position (so the ‘up’ indicator

on the lens is aligned with the

LED indicator on the camera, and

the edge of the lens is ﬂush with

the body of the camera) before

mounting, or removing the camera

from a mount to reduce the risk of

damage to the lens.

Zoom

The Drift HD Ghost includes a digital

zoom function that allows you to take

close-up photo and video.

While in Live Preview, or while

recording video, press and hold the

RIGHT button to zoom in, and the

LEFT button to zoom out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Drift HD Ghost Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Drift HD Ghost

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info