Bedienungsanleitung DRU GLOBAL 70 XT (Seite 35 von 60) (Englisch, Holländisch)

528138

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

English

INSTALLATION MANUAL

Global 70 / 70 XT

A number of components are placed in the control box,

such as data plate, gas control, receiver belonging to the

remote control.

Proceed as follows, when placing the control box; see ﬁ g. 4

for details:

• Make an opening in the chimney breast of 285 x 194 mm

(h x w).

• Place the inner frame (1); unscrew bolts (5) for this.

!Tip - When the chimney breast is made of

bricks, the inner frame can be built with

bricks at the same time;

- When using a different material, you can

glue the inner frame or ﬁ x it with four

ﬂ ush screws.

• Mount the gas control to the brackets of the inner

frame (2).

• Reconnect the pipes to the gas control.

- Avoid kinks in the pipes;

- Place the aluminium pilot burner pipe

free from the ﬂ oor and / or the wall;

- Tighten the ﬂ exible gas pipe and the pilot

burner pipe until they are gastight.

• If applicable, connect the wires of thermocouple 1 to the

gas control; see ﬁ g. 5.

- First tighten the thermocouple by hand

and;

- then tighten it a quarter turn using a

suitable spanner.

• If necessary, blow clean the gas pipe.

• Connect the gas pipe to the gas tap.

• Bleed the gas pipe.

• Place the receiver (3); for connections, see section 7.1.

• Place the data plate (6).

• Fix the outer frame with door (4) to the inner frame

using 2 socket cap screws.

!Tip You can place the outer frame in such a

way, that the door turns to the left or to

the right.

• If necessary, mount the control panel of the Max vent

system in the control box; see the manual for the Max

vent system.

6.8 Adjusting the appliance

The appliance has to be set in such a way that it works cor-

rectly in combination with the concentric system.

For that purpose, a bafﬂ e is placed and/or the air inlet guide

is removed. The conditions for using a wall terminal are

described in section 6.5.2.1, and for using a roof terminal in

section 6.5.3.1.

6.8.1 Bafﬂ e (R)

The bafﬂ e (R) is supplied separately.

This is mounted as follows (see ﬁ g. 6):

• Place the bafﬂ e.

• Use the template supplied to set the distance of the

restriction (see ﬁ g. 7).

• Fix the bafﬂ e by using the self-tapping screw (U).

6.8.2 Air inlet guide (L)

The air inlet guide (L) is located at the bottom side of the

tray (M) surrounding the burner.

If you want to remove it, proceed as follows; see ﬁ g. 8:

• Unscrew the self-tapping screws (O) and remove them.

• Take the tray surrounding the burner out of the appliance.

• Unscrew the self-tapping screws (N) and remove them.

• Remove the air inlet guide.

• Fit the tray surrounding the burner back in the appliance.

6.9 Placing the wood set

The appliance is supplied with a wood set.

Strictly observe the following instructions

to prevent unsafe situations:

- only ever use the supplied wood set;

- place the wood set exactly as described;

- make sure the pilot burner and the space

around it are kept free from objects

(see ﬁ g. 9);

- make sure that thermocouple 2 and the

space around it are kept free from

objects (see ﬁ g. 10);

- make sure that the slot between the

burner tray and the tray surrounding the

burner is kept free from objects;

- make sure there is no vermiculite’s ﬁ ne

dust on the burner.

6.9.1 Wood set

The wood set consists of black vermiculite (see ﬁ g. 11),

chips (see ﬁ g. 12) and four logs.

• Fill the burner tray with vermiculite; equally spread the

vermiculite.

!Caution - You can inﬂ uence the ﬂ ame image by

moving the vermiculite, yet

- the burner deck has to remain covered

with vermiculite in order to prevent that

the life expectancy of the burner is

reduced.

• Identify logs A up to D by using ﬁ g. 13a.

!Tip Use the burn stains on the logs for identi-

ﬁ cation.

• Successively place log A (rear log), log B (middle log) and

log C (right log); see ﬁ g. 13b to 13h.

Caution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DRU GLOBAL 70 XT Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DRU GLOBAL 70 XT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info