Bedienungsanleitung DRU Lugo 70 (Seite 12 von 44) (Englisch)

571623

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

English

INSTALLATION MANUAL

5.10 Additional instructions

The construction frame above cannot be adjusted afterwards.

If it concerns the free-standing Lugo 70/3 Module, please use the supplied manual for the construction of the

Lugo 70/3 Module. After that, the installation will be continued from chapter 5.14.

Attach the appliance to the wall by means of wall brackets (A) (see appendix 3, fig.1).

!Tip

Extension legs are available for this appliance.

5.11 Suspended placement of appliance

It is possible to suspend this appliance from a wall:

Determine the position and height of the appliance (see appendix 3, fig. 1 and 2a).

Attach the wall bracket (B) to the wall using the supplied key bolts.

!Caution

Attach the appliance to a vertical wall of solid, non combustible and heat-resistant material.

Use the slotted holes of the wall bracket to level.

At the bottom, unscrew the 2 adjustable feet (C) with lock nuts from the appliance and place them at the back of

the appliance.

Place the appliance in the wall bracket, wall bracket (A) will hook into wall bracket (B).

Use the adjustable feet (C) to level the appliance vertically, and lock them with the nuts.

5.12 Platform

The appliance should be placed with a platform, this can be in combination with lower decorative strip or adjacent

to the glass, the accompanying chimney breast can be used with or without a false wall (see appendix 3, fig. 2b).

!Caution

• Use non combustible and heat-resistant material;

• Do not allow the weight of the platform to rest on the appliance, therefore use the separately available

assembly set.

5.12.1 Platform combined with lower decorative strip (see appendix 3, fig. 2b (D)):

Create a recess in the platform in which the appliance will be placed, if a false wall (F) is used, the recess will be less

deep;

Mutually adjust the height of the appliance and assembly set, so that the top side of the platform connects to the

bottom side of the lower decorative strip.

5.12.2 Platform adjacent to the glass (see appendix 3, fig.2b (C)):

Create a recess in the platform in which the appliance will be placed, if a false wall (F) is used, the recess will be less

deep, the maximum material thickness is 30mm :

Remove the lower decorative strip (see appendix 3, fig. 2c (A)) by sliding it to the front and removing it, it will not

be placed back;

Unscrew the nuts (B) of the adjustment profiles (C) by a few turns and adjust the profiles to the correct height, this

will depend on the material thickness of the platform, indicators (D) have been applied for 20mm and 30mm

material thicknesses. Re-tighten the nuts (B);

Mutually adjust the height of the appliance and assembly set, so that the bottom side of the platform connects to

the adjustment profiles.

!Caution

• Do not allow the weight of the platform to rest on the appliance/adjustment profile;

• Make sure there is sufficient space for placing and removing the vertical decorative strip, we recommend a

clearance of 1 mm between the platform and the bottom side of the vertical decorative strip.

5.12.3 Placement of bracket with gas control plus accessories below the platform.

Place the bracket with gas control plus accessories below the platform using the supplied protective cabinet

(see appendix 3, fig 4a);

Place the attachment bracket (A) against the back wall using suitable fastening materials. Make sure the top of the

bracket connects against the platform.

!Caution

It is not allowed to place the bracket under the appliance.

Loosen the bracket with gas control plus accessories (B) from the appliance and attach it to the attachment

bracket (A) using the previously removed self-tapping screws;

!Caution

Never allow the bracket with gas control plus accessories to remain attached to the appliance and remove the

transportation bracket.

Position the gas pipe on the recess (1) in the protective cabinet, it is aligned with the connection on the gas

control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DRU Lugo 70 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von DRU Lugo 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info