Bedienungsanleitung DRU Opera DVS 2-01 (Seite 14 von 32) (Deutsch, Englisch, Holländisch, Französisch)

694490

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

USER MANUAL

Ignition

Ignition button A has three positions, i.e.:

O position button points to O

Pilot burner position button points to

Full position button points to

Turn the ignition button to the left from position O, press

down firmly as well and keep turning to the pilot burner

position

. By turning the button, the pilot burner is igni-

ted by means of an electrical spark. When the pilot burner

burns, keep pressing down the button for approx. 10 sec.

and then let go. The pilot burner is visible from the side,

behind the glass window. If the pilot burner does not igni-

te at once, the above-mentioned action can be repeated

immediately by turning the pressed down button back

towards O and then left again towards the pilot burner

position. After letting go of the ignition button, the pilot

burner should continue to burn. Then turn the ignition

button further towards the full position . Depending on

thermostat button B, the main burner will be ignited.

Controlling the temperature

The position of thermostat button B determines the

temperature in the room. Position 6 provides the highest

temperature, position 1 the lowest. The thermostat

controls the burner by modulating between “full position”

and “low position” of the burner. The thermostat will

automatically keep the room at the required set

temperature.

Switching off

Turn ignition button A back to the Pilot Burner position

(

symbol), only the pilot burner will continue to burn.

In order to switch off the appliance fully, you must press

down button A and turn it back to position O.

Important

An incorporated safety lock will be activated if the applian-

ce is set to the ,,OFF” (O) position. Therefore, wait

5 minutes before re-igniting the appliance. Do not try

to press down the ignition button during this time, as it is

locked by means of the safety lock. Do not force the

button, because the mechanism could get damaged.

Eco control pack

It is possible to order a separately available “Eco control

pack” with remote control. The “Eco control pack” is

needed to get the best out of your appliance.

This set has a receiver that must be placed in the tray

specifically intended for this purpose.

The tray is located under the gas control and can be rea-

ched by removing the cover.

Prevent cables from making contact with hot internal

components.

USER MANUAL

Ignition

Ignition button A has three positions, i.e.:

O position

button points to O

Pilot burner position button points to

Full position

button points to

Turn the ignition button to the left from position O,

press down firmly as well and keep turning to the

pilot burner position . By turning the button, the

pilot burner is ignited by means of an electrical

spark. When the pilot burner burns, keep pressing

down the button for approx. 10 sec. and then let

go. The pilot burner is visible from the side, behind

the glass window. If the pilot burner does not

ignite at once, the above-mentioned action can be

repeated immediately by turning the pressed down

button back towards O and then left again towards

the pilot burner position. After letting go of the

ignition button, the pilot burner should continue to

burn. Then turn the ignition button further

towards the full position . Depending on

thermostat button B, the main burner will be

ignited.

Controlling the temperature

The position of thermostat button B determines

the temperature in the room. Position 6 provides

the highest temperature, position 1 the lowest.

The thermostat controls the burner by modulating

between “full position” and “low position” of the

burner. The thermostat will automatically keep the

room at the required set temperature.

Switching off

Turn ignition button A back to the Pilot Burner

position ( symbol), only the pilot burner will

continue to burn. In order to switch off the

appliance fully, you must press down button A and

turn it back to position O.

Important

An incorporated safety lock will be activated if the

appliance is set to the ,,OFF” (O) position.

Therefore, wait 5 minutes before re-igniting the

appliance. Do not try to press down the ignition

button during this time, as it is locked by means of

the safety lock. Do not force the button, because

the mechanism could get damaged.

Eco control pack

It is possible to order a separately available “Eco

control pack” with remote control. The “Eco

control pack” is needed to get the best out of your

appliance.

This set has a receiver that must be placed in the

tray specifically intended for this purpose.

Art 2-01: The tray is located on the left side of the

gas control.

Art 3-01, 4-01, 5-01, 6-01, 8-02, 10-02: The tray is

located under the gas control.

Prevent cables from making contact with hot

internal components.

38P-0744/0

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

DRU Opera DVS 2-01 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info