783542

Dualit Classic Kettle Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
WATER
HARDNESS
Hardness
level
CaCO3 mg/l 0-100 101-200 201+
ACTION
FREQUENCY
Descale
At least once every
4 months or every
200 cycles.
At least every 2
months or every
100 cycles.
At least once per
month or every
50 cycles.
BPA
FREE
BPA
FREE
KNOW YOUR CLASSIC KETTLE
12 3
FILLING YOUR KETTLE
Ensure that the kettle is unplugged. Remove the
kettle from the Power Base. Lift the Lid by gently
pulling the Lid Ring up and back. CAUTION:
WHEN HEATING HOT STEAM WILL
BE EMITTED FROM THE KETTLE.
SCALDING WILL OCCUR IF YOU ARE
WITHIN 400MM OF THE LID OR SPOUT.
WARNING: IF THE KETTLE HAS JUST BOILED IT WILL BE FULL OF STEAM THAT WILL ESCAPE AS SOON AS THE
LID IS OPENED. THE LID WILL BE HOT. USE THE LID RING TO OPEN AND CLOSE THE LID. RISK OF SCALDING.
Filll the kettle through the Lid opening. Use at
least one cup of water (250ml). The water level
must stay below the Max Mark Indicator. Save
energy by only heating what you require. Keep
kettle upright and level at all times when lling.
Do not tilt kettle backwards. Do not overll
or ll through the Spout. Risk of scalding.
Push the Lid down using the Lid Ring to close.
WARNING: if the kettle has just boiled
the Lid will be hot.
Tip: If the Lid is too tight try pushing in the pips
on the inside of the Lid with a spoon handle.
Pushing the Lid pips back out will give a tighter t.
WARNING: IF THE LID IS TOO LOOSE,
RISK OF SCALDING.
OPEN LID LID TIGHTNESS
KETTLE REPAIR
Core components of your kettle are replaceable!
The Classic Kettle has been built to last, but should you experience any fault with your kettle, please contact Dualit for advice.
The Classic Kettle is repairable and tted with a patented, repairable element. Simply contact our helpline on 01293 652 500
or visit www.dualit.com/support for repair or servicing advice. All servicing must be carried out by Dualit or authorised repair agent.
For your own protection only use original Dualit spares in your kettle. Fitting of non Dualit parts will invalidate the guarantee.
FILLING
SETTING UP
Register your appliance at
www.dualit.com. This will
only take 60 seconds. You will
need the product model and serial
numbers that are on the rating label
on the base of the product.
Place your kettle as close to
the wall socket as possible. DO
NOT STORE OR USE YOUR
KETTLE IN APPLIANCE
GARAGE OR UNDER
CUPBOARDS. RISK OF FIRE.
REGISTER MY
APPLIANCE
CORD TIDY DO NOT...POSITION
Use the shortest cord possible.
Wrap excess cord around the
Cord Tidy under the Power Base.
Do not operate on an inclined plane.
Do not operate in a tray.
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
2 3 4
1
CLEANING & CARE
Before cleaning make sure the appliance is
switched off, unplugged and allowed to cool.
Remove kettle from the Power Base. Wipe
the outside and inside surfaces with a damp
cloth. Ensure that all connectors and sockets
are kept dry. Do not immerse the Body,
Power Base, Power Cord or Plug into
water or other liquid. Risk of electric
shock and re. Do not use sharp, abrasive
or aggressive cleaning agents, bleach or
scouring pads to clean the appliance.
The use of such cleaning implements
may affect the life of the appliance.
Make sure the appliance is switched off,
unplugged and allowed to cool. Open
the Lid. Hold the top of the Water Filter,
pull up and out of the kettle. Rinse under
a tap whilst brushing carefully with a soft
brush. Rinse out the kettle with fresh
water. To replace align the Water Filter
with the grooves in the Filter Holder,
insert and push back into place. Do not
operate kettle unless water lter is
correctly in position. Risk of scalding
and injury caused by misuse.
LIMESCALE BUILD UP
It is important to regularly descale
your kettle to prevent limescale
building up over time. This build up
can cause damage to your kettle
and alter the way your hot drinks
taste. Follow these steps to minimise
limescale build up in your kettle:
Empty the kettle after each use;
do not leave water in the kettle
overnight. Use ltered water instead
of tap water. Avoid using bottled
water as this is classed as hard water.
THE BODY WATER FILTER
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
BOILING WATER
LIMESCALE WARNING!
Place the kettle on the Power Base. Plug the
kettle into a power socket. Press the On/Off
Switch down. The Power Neon will illuminate
and the kettle will start to heat up. If the kettle is
accidentally switched on with no water inside, the
boil-dry device will switch off the heating element
to prevent damage to the kettle.
The kettle will automatically turn off after
the water has boiled. To turn off before the
water has boiled lift up the On/Off Switch.
DO NOT LEAVE THE APPLIANCE
UNATTENDED DURING USE.
UNPLUG AFTER EACH USE. RISK OF
FIRE IF AN UNATTENDED APPLIANCE
IS LEFT OPERATING OR PLUGGED IN.
Remove kettle from the Power Base. To avoid
risk of splashing, once the kettle has boiled wait
10 seconds then pour slowly. Do not over-tilt
the kettle.
TURN ON POURINGTURN OFF
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
1
1
2
2
3
BRITISH ISLES
& IRELAND
WATER
HARDNESS
MAP
SPOUT
WATER FILTER
VIEWING WINDOW
MAX MARK INDICATOR
POWER NEON
(RED)
POWER BASE
CORD TIDY
LID SEAL HINGED LID
LID RING
LID PIP (3x)
SURE GRIP HANDLE
ON/OFF SWITCH
POWER CORD
DESCALE REGULARLY
Dualit recommends descaling regularly; at least once every
2 months. If you live in a hard water area you may need
to descale more often. See our Water Hardness map to
determine how often you should descale your kettle. Dualit
recommends Kilrock K Multi-Purpose Descaler. This can be
purchased from www.dualit.com. Other descalers can be used;
follow the instructions on the packaging. When descaling has
nished empty the kettle and rinse it out a minimum of 3
times with fresh water. Rell with fresh water, boil, then
discard the boiled water. FAILURE TO DO SO CAN
CAUSE INJURY. DO NOT HEAT KETTLE
WITH DESCALING SOLUTION IN IT.
Soft Medium Hard
Patents: US5957723, AU2015200593, DE69701177,
CN104825053. Pending Patents: GB2524872,
GB150200.1. Design Reg: 002399337.
Trademarks: WE923789, UK2416444
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dualit Classic Kettle wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dualit Classic Kettle

Dualit Classic Kettle Bedienungsanleitung - Deutsch - 32 seiten

Dualit Classic Kettle Zusatzinformation - Englisch - 1 seiten

Dualit Classic Kettle Bedienungsanleitung - Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch - 32 seiten

Dualit Classic Kettle Zusatzinformation - Alle Sprachen - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info