Bedienungsanleitung Dualit Espress Auto Coffee and Tea Machine (Seite 9 von 19) (Englisch)

783565

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

16 17

Align the Filter Holder with the

open lock symbol, insert then

rotate 60° past the closed lock

symbol. Ensure the Holder

is fully locked before

dispensing. Risk of

scalding. Place 1 or 2 warmed

cups directly under the Nozzles

of the Filter Holder.

To extract, press the espresso

or double espresso Auto

Dosing button. To extract tea,

press the tea Auto Dosing

button. Caution: Never use

Auto Dose Tea function

with coffee capsules.

If the machine stops mid

extraction, discard and

replace the capsule, ESE pod

or ground coffee and restart

by pressing the required

Dosing Button.

COFFEE & TEA EXTRACTION

When switching from coffee to tea, all dosing buttons may ash due to the Thermobloc

heating water to your chosen temperature. When switching from tea to coffee, the machine

may purge to cool the Thermobloc. This is normal operation. PLEASE CAREFULLY

SELECT REQUIRED BUTTON. FAILURE TO DO SO MAY BLOCK YOUR

SHOWERHEAD, PREVENTING OR SLOWING DOWN EXTRACTION.

CAUTION: DO NOT USE TEA BUTTON WITH COFFEE CAPSULES, THIS

MAY DAMAGE YOUR MACHINE AND INVALIDATE YOUR WARRANTY.

EXTRACTIONSELECT AUTO

DOSE

ATTACH HOLDER

LOCK

4 5

When the correct dose has

dispensed, the machine will

automatically stop. Allow to

cool for 10 seconds before

removing NX Holder. All

Auto Dosing buttons will illuminate

when ready for the next extraction.

Unplug when not in use.

Stop extraction mid cycle by

pressing illuminated Dose

Button, when pressed again

full dose cycle will resume.

Dispense a cup full of

water through the machine

between making a coffee

and tea to prevent tainting.

6BETWEEN DRINKSMANUALLY STOP

EXTRACTION

STOP

EXTRACTION

7 8

When using the Filter Holder,

knock out the grounds over a

bin. Rinse the Filter under

running water to remove any

coffee grounds. Use the Filter

Pin to unblock the lters or

NX® Adaptor if required.

Turn machine off by pressing

Power ON/OFF Switch after

you have rinsed through and

nished using the machine.

This will save energy.

Unplug when not in use.

TURN OFFCLEAN FILTER OR

NX® ADAPTOR

WHEN SWITCHING FROM STEAM TO COFFEE OR

TEA EXTRACTION: WAIT 10 SECONDS BEFORE

REMOVING THE HOLDER AFTER DOSING FIRST DRINK

IS COMPLETE.

1 2

Press the Steam Button. It will

ash red until the temperature

is correct for steam, then it will

turn solid red.

Put the Froth Nozzle on the

end of the Steam Wand.

Push up against the Stopper

shown above. Caution:

Wand may be hot. Risk

of scalding.

Use 75-200ml of cold

semi-skimmed milk in a

stainless steel jug. Position

the head of the Froth Nozzle

just under the surface of the

milk. Risk of scalding.

FROTHING MILK

IMPORTANT NOTICE: AFTER EACH USE, WIPE THE STEAM WAND &

FLUSH THE INSIDE OF THE WAND BY DISPENSING WATER THROUGH

THE WAND.

POSITION JUGATTACH NOZZLESELECT STEAM

CAUTION! Take care when using the Milk Jug, as edges may be sharp.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dualit Espress Auto Coffee and Tea Machine Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dualit Espress Auto Coffee and Tea Machine

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info