783546
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
LIMESCALE WARNING!
90°
100°
KNOW YOUR JUG KETTLE
SETTING UP
BOILING WATER
Plug the kettle into the power socket. Press the
‘On/Off’ switch down. The power neon will
illuminate and the kettle will start to heat up.
If the kettle is accidentally switched on with no
water inside, the boil-dry device will switch off the
heating element to prevent damage to the kettle.
The kettle will automatically turn off after the
water has boiled and the neon light will go out.
To turn off before the water has boiled lift up
the On/Off Switch. DO NOT LEAVE THE
APPLIANCE UNATTENDED DURING
USE. UNPLUG AFTER EACH USE.
RISK OF FIRE IF AN UNATTENDED
APPLIANCE IS LEFT OPERATING OR
PLUGGED IN.
Remove Kettle from the Power Base. When lling
or carrying the Kettle do not tilt it backwards or
turn upside down as this may allow water to pass
through the Steam Tube onto the control area.
Should this happen, the Kettle must be allowed
to dry fully before reusing. Unplug and leave
for a minimum of 8-24 hours to dry fully
before using again. Only empty the Kettle
through the Spout. To avoid the risk of splashing,
once the Kettle has boiled wait 10 seconds then
pour slowly. Do not over tilt the Kettle or pour
past 90°c.
TURN ON POURINGTURN OFF
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
Register your appliance at
www.dualit.com. This will
only take 60 seconds. You will
need the product model and serial
numbers that are on the rating label
on the base of the product.
Place your kettle as close to the
wall socket as possible. DO NOT
STORE OR USE YOUR KETTLE
IN APPLIANCE GARAGE OR
UNDER CUPBOARDS. RISK
OF FIRE.
REGISTER MY
APPLIANCE
CORD TIDY DO NOT...POSITION
Use the shortest cord possible.
Wrap excess cord round the Cord
Tidy on the base of the kettle.
Do not operate on an inclined plane.
Do not operate in a tray.
SPOUT
Easy-pour non drip spout STEAM TUBE
‘Max’ Mark Indicator
HINGED LID
Ball Knob and Finger Guard
LID PIP (2x)
HANDLE
Easy Grip Handle with
Knuckle Guard
ON/OFF SWITCH
POWER BASE
Cord Tidy
POWER CORD
WATER FILTER
Reduces limescale particles
going into the cup
VIEWING WINDOW
Easy to read Cup Level Indicators
POWER NEON
Illuminates when heating
DON’T FORGET
TO REGISTER
YOUR PRODUCT
WWW. DUALIT.COM/REGISTER
OR BY POST
2
2
3
3
4
4
5
1
1
FILLING YOUR KETTLE
Ensure the kettle is unplugged.
Remove the kettle from the Power
Base. Pull the Knob up and towards
the handle to open the lid. The Lid is
hinged for easy opening and closing.
WARNING: IF THE KETTLE
HAS JUST BOILED, THE
LID WILL BE HOT. USE THE
KNOB TO CLOSE THE LID.
WARNING: IF THE KETTLE HAS JUST BOILED IT WILL BE FULL OF STEAM THAT WILL ESCAPE AS SOON AS
THE LID IS OPENED. THE LID WILL BE HOT. USE THE KNOB TO OPEN AND CLOSE THE LID. RISK OF SCALDING.
Fill the kettle through the Lid opening.
Use at least one cup of water (250ml).
The water level must stay below the
‘Max’ Mark Indicator. Save energy,
only boil what you require. Keep
kettle upright and level at all times
when lling (maximum 15o incline).
Do not tilt kettle backwards.
DO NOT OVERFILL OR FILL
THROUGH THE SPOUT. THIS
MAY CAUSE YOUR KETTLE
TO NOT SWITCH OFF.
CAUTION
when lling
to ensure
water does
not go down
Steam Tube,
preventing
the kettle
from correct
operation.
OPEN LID FILLING STEAM
TUBE
Push the Lid
down using the
knob to close.
Check that it
is fully in place,
otherwise the
kettle may
not switch off
when boiling.
CLOSE
LID
Tip: If the Lid is too tight, try
pushing in the pips on the inside
of the Lid with a spoon handle.
Pushing the Lid Pips back out will
give a tighter t. WARNING:
IF THE LID IS TOO LOOSE,
RISK OF SCALDING.
LID TIGHTNESS
1 2 3
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
WATER
HARDNESS
Hardness
level
CaCO3 mg/l 0-100 101-200 201+
ACTION
FREQUENCY
Descale
At least once every 4
months or every 200
cycles.
At least every 2
months or every
100 cycles.
At least once per
month or every
50 cycles.
LIMESCALE BUILD UP
It is important to regularly descale
your kettle to prevent limescale
building up over time. This build up
can cause damage to your kettle
and alter the way your hot drinks
taste. Follow these steps to minimise
limescale build up in your kettle:
Empty the kettle after each use;
do not leave water in the kettle
overnight. Use ltered water instead
of tap water. Avoid using bottled
water as this is classed as hard water.
BRITISH ISLES
& IRELAND
WATER
HARDNESS
MAP
DESCALE REGULARLY
Dualit recommends descaling regularly; at least once every
2 months. If you live in a hard water area you may need
to descale more often. See our Water Hardness map to
determine how often you should descale your kettle. Dualit
recommends Kilrock K Multi-Purpose Descaler. This can be
purchased from www.dualit.com. Other descalers can be used;
follow the instructions on the packaging. When descaling has
nished empty the kettle and rinse it out a minimum of 3
times with fresh water. Rell with fresh water, boil, then
discard the boiled water. FAILURE TO DO SO CAN
CAUSE INJURY. DO NOT HEAT KETTLE
WITH DESCALING SOLUTION IN IT.
Soft Medium Hard
CLEANING & CARE
U
N
P
L
U
G
W
H
E
N
N
O
T
I
N
U
S
E
P
L
U
G
I
N
B
E
F
O
R
E
U
S
E
Before cleaning make sure the appliance is
switched off, unplugged and allowed to cool.
Remove kettle from the Power Base. Wipe
the outside and inside surfaces with a damp
cloth. Ensure that all connectors and sockets
are kept dry. Do not immerse the Body,
Power Base, Power Cord or Plug into
water or other liquid. Risk of electric
shock and re. Do not use sharp, abrasive
or aggressive cleaning agents, bleach or
scouring pads to clean the appliance.
The use of such cleaning implements
may affect the life of the appliance.
Make sure the appliance is switched off,
unplugged and allowed to cool. Open
the Lid. Hold the top of the Water Filter,
pull up and out of the kettle. Rinse under
a tap whilst brushing carefully with a soft
brush. Rinse out the kettle with fresh
water. To replace align the Water Filter
with the grooves in the Filter Holder,
insert and push back into place. Do not
operate kettle unless water lter is
correctly in position. Risk of scalding
and injury caused by misuse.
THE BODY WATER FILTER
12
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dualit Lite Kettle 1.5 L wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Dualit Lite Kettle 1.5 L

Dualit Lite Kettle 1.5 L Bedienungsanleitung - Deutsch - 6 seiten

Dualit Lite Kettle 1.5 L Zusatzinformation - Englisch - 2 seiten

Dualit Lite Kettle 1.5 L Bedienungsanleitung - Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch - 6 seiten

Dualit Lite Kettle 1.5 L Zusatzinformation - Alle Sprachen - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info