Bedienungsanleitung Dualit Pour Over Kettle (Seite 6 von 114) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

783532

Zoom out

Zoom in

Vorherige Seite

1/114

Nächste Seite

of reach of children.

• Avoid spilling of any liquid on the connector.

• Allow the kettle to cool down completely

before cleaning and storing.

• To disconnect, remove plug from wall outlet.

• Unplug the Power Base from the wall socket

when not in use, or before moving and

cleaning.

• CAUTION: To prevent damage to the

appliance, do not use alkaline cleaning agents.

When cleaning, use a soft cloth and a mild

detergent.

• Do not use scouring pad or abrasive cleaner

on the appliance body.

• Use the kettle only with the Power Base

supplied and vice versa.

• The use of accessory attachments not

recommended by Dualit may result in re,

electric shock or injury to persons.

• A short Power Cord is provided to reduce

risks resulting from becoming entangled in or

tripping over a longer cord.

• Do not heat the kettle if lled with

descaling solution.

SAVE THESE

INSTRUCTIONS

Unpack the box with care, keeping all the

packaging materials until you are satised

everything is present and in working order.

Once satised remove any tags

from the appliance body and

recycle the packaging appropriately.

Do not remove tags from the

cord. You may wish to keep the

box to store your appliance.

IMPORTANT SAFTEY PRECAUTIONS

water.

• Do not move the kettle while it is switched on.

• Do not remove or open the lid while the

water is heating

• Use handles or knobs – do not touch hot

surfaces.

• If the kettle is overlled, hot water may be

ejected.

• When heating, hot steam will be emitted

from the kettle. Scalding will occur if you are

within 400mm of the Lid, Spout or Steam

Vents either side of the lid.

• Ensure that the kettle Spout is pointing away

from any electrical plug or socket.

• Scalding will occur if the Lid is opened during

the heating cycle and the body of the kettle

will get hot.

• This kettle features boil-dry protection. If

the kettle is accidently switched on without

water, the boil-dry device will switch off

the heating element to prevent damage to

the kettle. Wait approximately 10 minutes

for the kettle to cool down, lift and rell as

normal. The kettle is now ready to use again.

NOTE: If discolouration of the heating plate

has occurred, this can be easily removed by

descaling your kettle.

• Take care when pouring – pour slowly and do

not over-tilt the kettle.

• Water will remain hot for a considerable

time after heating and can present a scald

hazard. Keep the kettle, Power Base and the

mains lead away from the edge of worktops

and out of the reach of children. CAUTION:

This kettle has a hold function which

will maintain the temperature for a

further 5 minutes after reaching target

temperature. Risk of scalding. Keep out

DON’T FORGET

TO REGISTER

YOUR PRODUCT

WWW. DUALIT.COM/REGISTER

OR BY POST

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dualit Pour Over Kettle Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dualit Pour Over Kettle

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info