Bedienungsanleitung Dualit Steam Steriliser (Seite 5 von 11) (Englisch)

783576

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

08 09

DON’T FORGET

TO REGISTER

YOUR PRODUCT

WWW. DUALIT.COM/REGISTER

OR BY POST

1 2

Position the Steriliser on

a at surface away from

sources of heat. Place the

Steriliser as close to the

wall socket as possible.

Do not store or use

the Steriliser in an

appliance garage or

under cupboards,

close to curtains or

ammable material as

the Steriliser will emit

steam from the Steam

Vents in the Lid.

Do not cover vents,

covering vents causes

risk of re.

Dualit.com this will only take

60 seconds; you will need

the product model and

serial number which is on

the rating label on the base

of the product.

Pour exactly 90ml of fresh tap water into the Water Recess.

Do not exceed the max marker. You can use demineralised

water if you want to reduce the number of times you need to

descale.

Ensure that the Steriliser is

placed on a heat resistant

work surface. Do not

operate on a tray. Do not

let the cord hang over the

edge of work surfaces or

touch hot surfaces.

SETTING UP

Read and follow these instructions before using your Steriliser.

THIS IS AN ATTENDED APPLIANCE. Do not leave

unattended during use, unplug after each use (risk of re if an

unattended appliance is left operating).

Never remove the Lid while the Steriliser is operating (Power Indicator Light is illuminated).

This will cause a failure to sterilise. Please wait 5 minutes for the Steriliser to cool before

removing the Lid. Warning: Hot water and steam may cause serious injury and

burns; keep hands away from hot surfaces and steam vents. Risk of scalding.

Before rst use, wash the Upper and Lower Racks and the Lid with warm soapy water and

rinse thoroughly. Do not submerge the Base, Power Cord or Plug as there is a risk of electric

shock and permanent damage to the appliance.

Clean and rinse bottles,

dummies and teats before

sterilising.

After lling your Steriliser with 90ml of water,

place the Lower Rack into position. Ensure

Lower Rack is positioned correctly with logo

facing forward. Warning: The appliance

will not sterilise if Lower Rack is

incorrectly positioned.

USING YOUR STERILISER

Before rst use or after a long period of no use, ll and then

operate your Steriliser empty with no bottles on a Sterilise function

(Steps 1-15 below).

It is important that all bottles, teats and accessories are empty,

separated and that they are thoroughly cleaned using soap suds and rinsed in fresh water

before placing in the Steriliser for sterilisation.

Warning: The Steriliser is only suitable for high temperature-resistant bottles

and items that can withstand a temperature of 100°C.

Position baby bottles on the Lower Rack facing

downwards with the necks over the locators.

Place the bottle lids over the bases of the bottles.

Notes: The Steriliser can accommodate a

maximum of 6 bottles at a time.

Warning: Only operate with

90ml of water and do not over

ll. Ensure water is not spilled

or poured into the Air Vent

area. Never use less than 90ml

of water as sterilisation will

not complete, risk of bacterial

or viral contamination.

Tip - You can use a baby bottle

as a measuring device or weigh

90g of water.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dualit Steam Steriliser Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info