Bedienungsanleitung Dualit Vario (Seite 11 von 13) (Englisch)

783548

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

20 21

6MM

2-END

DUALIT

TROUBLESHOOTING

MY TOASTER IS NOT WORKING:

• Check the toaster is plugged in.

• Check if the ‘neon’ is glowing red when the timer is activated.

If yes, your elements, ‘selector’ switch or your thermal fuse may need replacing.

If no, your plug fuse may have blown or your timer may need replacing.

I GET UNEVEN TOASTING:

• Check the selector switch is set for the number of slots being used.

• Starting from the left, ensure you have loaded all heated up slots.

• The heavy duty Proheat elements can take a few moments to reach optimum toasting

temperature. Preheating the slots prior to inserting your bread will eliminate this. Rotate the

‘timer’ all the way round, let it wind down to the circle indicator then insert your bread into

the active slots.

• Ensure size and type of bread being toasted is the same.

• End elements take a little longer to warm up than centre elements, once toaster is at

optimum operating temperature this will no longer occur.

• If the timer is noticably slow, isolate and do not use the toaster. Spare timers are

available from www.dualit.com and must be tted by a qualied electrical engineer.

MY TOASTER WOBBLES ON MY WORK SURFACE:

• Use the adjustable foot under the toaster to compensate for uneven surfaces.

MY TOAST GETS STUCK WHEN I EJECT FROM THE TOASTER:

• Unplug and allow to cool before attempting remove the toast. Note: slices thicker

than 28mm will get stuck. Hand cut slices must be cut evenly.

• Using a ‘sandwich cage’ can make toasting thicker items easier.

ONE SIDE OF MY BREAD IS NOT TOASTING:

• Check the ‘selector’ switch is set correctly and insert bread from the very left hand slot.

• One or more of the elements may need replacing, call the helpline or visit

www.dualit.com for replacements.

REPLACING ELEMENTS

ALL SERVICING MUST BE CARRIED OUT BY A

QUALIFIED ELECTRICIAN OR REPAIRER & PORTABLE

APPLIANCE TESTED.

TO REPLACE FUSE,

REMOVE SILVER LABEL

TO ACCESS SCREW.

6MM

2-END

DUALIT

Unplug and place toaster on

a soft cloth. Remove crumb

tray and unscrew feet

to remove the base plate.

Loosen locking nuts on

retaining plate using a

6.5mm spanner and

slide back. Ensure that

the retaining plate is

correctly in position

when reassembling.

Unscrew brass links and

wires.

6MM

2-END

DUALIT

Bend brass links and wires

away from the element.

Remove element. To reassemble, reverse procedure

ensuring wires and parts are correctly positioned. Ensure new

element is marked the same as the one removed.

The element heats on both sides and can be inserted facing

either way. Check it is seated correctly in the channels either

side. Portable Appliance Tested before use.

6MM

2-END

DUALIT

6MM

2-END

DUALIT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dualit Vario Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dualit Vario

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info