Bedienungsanleitung Dunavox DAU-36.80DB (Seite 9 von 19) (Englisch)

651049

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Code Rev. D 20140818 (IEC)

lock on the door) and relocate the door to the

designated position. Then screw the bottom

hinge assembly on the left designated position

and tighten it after the door is leveled.

9. Transfer the handles & plugs to the opposite

positions and then reassembly the ventilation

grilles if need.

DESIGN 2 – For fully integrated models

1. Remove the glass door by unscrewing the eight

lock screws

○

,3 and

○

,4. Be careful to hold

the glass door firmly after removing the screws

and place it on a padded surface to avoid the

risk of damage.

2. Unscrew and transfer the door supporter

○

to the opposite side.

3. Rotate the glass door 180°and refit the glass

door to the opposite side. Then screw and

tighten it after the door is leveled.

DESIGN 3 – For tall models

1. Remove the bottom hinge

○

,1 by unscrewing

the four lock screws

○

,2. Be careful to hold the

glass door firmly after removing the screws. (Fig.

2. Gently pull down to remove the glass door from

the right top hinge and place it on a padded

surface to avoid the risk of damage. Then

remove the right top hinge

○

,9. (Fig. 4)

3. Pop out the cover caps on the left side of

cabinet and use them to cover the screw holes

on the right hand side.

4. Screw the alternative left top hinge

○

,8 ,

included in the fittings, on the left hand side of

cabinet. (Fig. 4)

5. Unscrew and transfer door supporter

○

,10 to

the opposite side. At the same time remove the

stopper pin

○

,7 of bottom hinge to the opposite

designated position or unscrew and transfer the

hinge pin

○

,7a of bottom hinge to the opposite

designated position. (Fig. 5 & 3)

6. Unscrew and transfer the door adapter

○

and lock catch

○

,4 to the top designated

position of glass door. (Fig. 2)

7. Rotate the door 180° and relocate the glass door

to the designated position. Then screw the

bottom hinge on the left designated position and

tighten it. (Fig. 5)

8. Recheck and adjust the door alignment by

loosening the screws

○

,6and moving the door

adapter

○

,5. Tighten the screws

○

,6 after the

door is levelled. (Fig. 5)

DESIGN 4 – For double door models

1. Remove the bottom hinge

○

,1 by unscrewing

the four screws

○

,2. Be careful to hold the

lower glass door

○

,3 firmly after removing the

screws. And then gently pull down to remove

the lower glass door from the middle hinge and

place it on a padded surface to avoid the risk of

damage. (Fig. 1)

2. Unscrew and transfer the door adapter

○

and

○

,7 to the designated opposite position of

lower glass door. (Fig. 2)

3. Remove the door adapter

○

,14 by unscrewing

the two lock screws

○

,13. Be careful to hold

the upper glass door firmly after removing the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dunavox DAU-36.80DB Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info