Code Rev. D 20140818 (IEC)
11º-22ºC (52º-72ºF). The preset temperature at
the factory is 18ºC (65ºF).
The temperature settings of MIDDLE
temperature zone are adjustable with the range
5º-11ºC (41º-52ºF). The preset temperature at
the factory is 8ºC (46ºF).
The temperature settings of LOWER
temperature zone are adjustable with the range
11º-13ºC (52º-56ºF). The preset temperature at
the factory is 12ºC (54ºF).
Temperature control for UPPER and MIDDLE
temperature zones is at upper control unit.
Temperature control for LOWER temperature
zone is at lower control unit.
When you press the two keys at the first time,
the display will show the last temperature set
previously. The temperature will increase 1°C or
1ºF if you press the UP key once, on the
contrary the temperature will decrease 1°C or
1ºF if you press the DOWN key once. The
display flashes while you make the setting.
After the temperature has been set, the display
shows the current inner temperature of the
particular temperature zone.
To view the set temperature at any time, press
the UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds.
Then the display shows the current inner
temperature again.
TEMPERATURE DISPLAY
During normal operation, the temperature display on
the control panel shows the temperature inside the
appliance. The temperature display will flash if
- A different temperature is being set,
- The temperature in the zone deviates by more
than 5°C from the set temperature.
The temperature display flashing ensures that the
temperature can not rise or fall un-noticed and
impair the wine.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge,
breaker switch, etc.), the unit remembers the
previous temperature settings. When the power is
recovered, the cabinet temperature will go back the
same setting temperature as before the power
interruption.
TEMPERATURE ALARM
An alarm will sound if the temperature in one of the
zones rises or falls outside the temperature range.
The relevant temperature display will flash at the
same time.
The temperature the appliance is set at determines
the temperature the appliance recognises as being
too warm or too cool.
The alarm will sound and the temperature display
will flash:
- When you switch the appliance on, if the
temperature inside the appliance is very different
from the temperature set.
- When there has been a lengthy interruption to
the power supply.
- When too many items have been put into the
unit at one time.
- When the door is not closed tightly.
DOOR ALARM
If the door has been left open for more than 60
seconds, the alarm will sound.
Once the set temperature has been reached in the
appliance, the alarm stops and the relevant
temperature display stops flashing. However, if the
noise disturbs you, you can switch the alarm off
before this if you wish by pressing the POWER key
once. The alarm will stop. The relevant temperature
display continues to flash until the set temperature
has been reached. The display then lights up
constantly, and the alarm system is fully active again.
INTERIOR LIGHT
The interior light makes it easy to view your wine
labels and enhances the display of your collection.
Touching the LIGHT mark toggles between 2 modes
of operation for the internal lights: functional (default)
mode and showcase mode. If you are in functional
(default) mode, the lights will turn on only when the
door is open. If you are in showcase mode, the lights
will be on whether or not the door is open.
The unit is equipped with a LED light fitting system.
To change the LED light fitting pls contact the
service department.
NOTE: Please use only the original LED light fittings
provided by the manufacturer.
BOTTLE RACKS AND STORAGE
WARNING: Do not pull out more than one loaded
shelf at a time as this may cause the unit to tilt
forward.
WARNING: Do not try to slide the shelves outwards
beyond the fixed position to prevent the bottles from
falling.
WARNING: To prevent damaging the door gasket,
make sure the door is fully open when pulling
shelves out of the compartment.
