Bedienungsanleitung Dune BD Prime 3.0 (Seite 6 von 44) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

499437

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Dune BD Prime 3.0 Quick Start Guide

Playing Optical Discs

To play an optical disc, ensure you are on the main screen of the player menu and insert the optical disc

into the optical drive of the player. The player will recognize the optical disc, and will enable the item cor-

responding to the optical drive. Depending on the player settings, the player may also automatically start

the playback of the disc or request a conﬁ rmation to play the disc.

Connecting USB Drives

To connect a USB drive, ensure you are on the main screen of the player menu and connect the USB drive

to an USB port of the player. The player will recognize the USB drive, and will show an item corresponding

to the USB drive on the main screen.

When connecting a USB drive requiring signiﬁ cant power (such as USB HDD), use an external power

supply for the USB drive. Power provided by the USB ports of the player may not be enough for correct

functioning of the USB drive.

Do not disconnect or switch off the USB drive when some write operation is in progress.

Connecting eSATA Drives

To connect an eSATA drive, switch off both the player and the eSATA drive, connect the eSATA drive to the

eSATA port of the player (and connect the eSATA drive to its power supply), switch on the eSATA drive,

and, as the last step, switch on the player. The player will recognize the eSATA drive, and will show an item

corresponding to the eSATA drive on the main screen of the player menu.

Switch off and disconnect the eSATA drive only after switching off the player.

Accessing Network Drives

To connect a network drive using SMB or NFS protocol, ensure you are on the main screen of the player menu,

press the "MENU" RC button, and choose "Create Network Folder", then ﬁ ll the parameters of the network drive

as needed. The player will show an item corresponding to the conﬁ gured network drive on the main screen.

To browse the list of network resources accessible via SMB or UPnP protocols, use "Network Browser"

item on the main screen of the player menu. NOTE: If some network resources are not shown by the

player, you may need to wait some minutes and then retry (or press the "MENU" RC button and choose

"Refresh" command).

Formatting HDD

To format a HDD attached to the player, select the drive item on the main screen of the player menu, press

the "INFO" RC button and choose "Format Disk" (to format the entire disk) or "Format Partition" (or to for-

mat an already existing disk partition only). The player will format the disk using "EXT2" ﬁ lesystem. NOTE:

To use disks formatted by the player on a Windows PC, you may need to install additional software on the

PC, such as "EXT2FSD" (http://www.ext2fsd.com/).

Power Off and Standby

To switch off the player completely, toggle the power switch on the front panel. After the player is switched

off, it is recommended to wait about 1 minute before switching it on again. NOTE: Do not switch off the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dune BD Prime 3.0 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info