Bedienungsanleitung Dunlop Concept 2500 (Seite 5 von 11) (Englisch, Holländisch, Französisch)

793660

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ASSFMBLY !àISTRUCTIONS : HOMETRATNER CONCEPT 2SOO

l. Attach the front foot (2) and the back foot (l) to the main body (1) using bolts ({), washers (7) and nuts

(§). Tighten using a spanner.

2. Attach the saddle stem (9) to the saddle (8) using nylon nuts and washers, and tighten using a spanner.

3. Slide the saddle stem ínto main body and pull seat adjustment knob (18) to select desíred height. Always

ensure knob is screwed and fitted tightly.

4. Release locking clip (ft) by pulling resistance band (13) ensuring band does not come completely out of clip.

Connect the resistance adjustment cable (14 and the resistance band and spring(i3), then connect the

computer cables (l§) in one, pull the cable out of the top of the handlebar stem for connection with the

computer. Then fit the handlebar stem (l!) to the main body(l) using the domed socket bolts (i0 and

washers fl/1. Tighten the bolts. Ensure all cables are tucked inside the handlebar stem. With tension knob i

@ set at minimum pull resistance band upwards so that the flywheel turns freety and re-tighten the

locking clip. I

5. Slide the handlebar (19) into the handlebar holder, then tighten with the butterflyknob (fitted). Fit the

handlebar grips (24 to the handlebar (put a little soapy water for easier assembty), and insert the small

plastic caps into the handlebar pipe.

6. Fit the computerQJ) to the handlebar stem bracket and insert the plug into the computer. lnsert the

earclip into the pulse terminal.

7. ldentify the left and right hand pedals 129;. Attach the right hand pedal to the right crank on the main

body and tighten by turning in clockwise direction. The left hand pedal must be fitted to the left hand crank

and tighten by turning in an anticlockwise direction.

TIPS

l. Follow this assembly manual carefully.

2. Make sure all bolts and nuts are securily tightened, using the provided locking washers.

3. This hometrainer has been designed for a long and unproblematic use. Please check all bolts and nuts

regular and apply lubrication to moving parts regular.

CAUTION

1. Do not wear loose fitting clothing that could become entangled in any moving parts.

2, Do always wear shoes when you exercise.

3. Keep the unit out of reach for children.

4. children should not be in the immediate area when the unit is being used.

5. Consult your physian before starting any exercise program.

6. Stop exercising immediately in case of nausea, shaking, shortness of breath, pain in the chest or

headache.

7. Do not exercise 45 minutes before eating or J hour after eating.

INSTRUCTIOI|S MONTTOR

Functions buttons

l.ilODE

SET

RESET

ST/STOP

Press to select each mode.

Set target values time, distance, calorie, and pulse.

One-touch for single function value reset. lf hold on the button for values of all functions

reset.

Press to start or stop the operation of functions.

-5-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dunlop Concept 2500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info