Bedienungsanleitung Durabrand CDA1366 (Seite 2 von 2) (Englisch)

35295

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1. Handle

2. Cassette deck

operation controls

PAUSE button

STOP button

F.FWD button

REW button

PLAY button

RECORD button

3. CD REPEAT button

4. CD STOP button

5. CD PLAY / PAUSE button

6. CD door

AC POWER

You can power your portable stereo system by plugging the detachable AC

power cord into the AC inlet on the back of the unit and into a wall AC

power outlet.

Check that the rated voltage of your unit

matches your local voltage. Make sure that

the AC power cord is fully inserted into the

unit.

Caution: (for North America)

To prevent electrical shock, match wide blade

of plug to wide slot, fully insert.

Note : When not being used on mains the

AC Cord should be unplugged from the unit.

NAMES OF CONTROLS RADIO OPERATION

You can listen to your favourite radio stations by sliding the FUNCTION

switch to RADIO, and then

1. Slide the BAND switch to choose AM(MW) or FM.

2. Using the TUNING control to choose a desired station.

• Adjust the VOLUME.

POWERING UP

BATTERY POWER

Insert "C" size batteries in the battery compartment. Be sure that the batteries

are inserted correctly to avoid damage to the unit.

• Always remove the batteries when unit will not be used for a long period

of time, as this will cause leakage of the batteries and subsequently

damage to your unit.

• Playback will automatically come to a

stop when the batteries have no more

power. Replace all the batteries with

new ones.

• Do not mix old and new batteries. Do

not mix ALKALINE, standard

(CARBON-ZINC) or rechargeable

(NICKEL-CADMIUM) batteries.

AM(MW)/FM

• Repositioning the unit to get better AM(MW)/

FM reception.

Note: After listening, slide the FUNCTION switch

to TAPE.

VOLUME

Adjust the VOLUME control of the stereo system to a desired level.

FOR PRIVATE LISTENING

Connect headphones (Ø3.5 mm stereo mini-plug) to the PHONES jack.

When headphones are connected, speakers automatically disconnected.

ADJUSTING THE SOUND

TO STOP PLAYBACK

• Press the CD STOP button to stop disc play.

TO INTERRUPT PLAYBACK

• Press the CD PLAY/PAUSE button while a CD is playing to pause

play (the CD PAUSE " " indicator will blink).

• Press the CD PLAY/PAUSE button again to resume play.

TO SKIP TO THE BEGINNING OF A TRACK

• Press either one of the CD SKIP or button according to the desired

direction. Each press skips one track. During play, the first press on the

skip backwards button to the beginning of the current track.

• Playback resumes from the selected track.

TO SEARCH THROUGH TRACKS

• Keep either one of the CD SKIP or button pressed, according to the

desired direction, and release at the desired point.

REPEAT PLAY -- in play modes

This function allows one track or all tracks on a disc to be played repeatedly.

TO REPEAT THE SAME TRACK

• Press the CD REPEAT button once during playback, the REPEAT ONE

" " indicator will blink.

TO REPEAT THE WHOLE DISC

• Press the CD REPEAT button a second time to repeat all tracks, the

REPEAT ALL " " indicator will light.

TO CANCEL REPEAT PLAY

• Press the CD REPEAT button until the REPEAT indicator is turned off.

Note: Repeat play can only be done when the unit is in the play mode.

TAPE PLAYBACK

1. Slide the FUNCTION switch to TAPE.

2. Insert a cassette tape.

3. Press the cassette of PLAY button.

TO STOP PLAYBACK

• Press the cassette of STOP button.

TO FAST WIND

• Press the cassette of F.FWD or REWIND button.

• Press the cassette of STOP button to stop winding at the desired position.

RECORDING

USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.

1. Insert a cassette tape.

2. Prepare the source to be recorded and play it.

3. Press the cassette of RECORD button which also engages the cassette

of PLAY button. Recording starts immediately.

TO STOP RECORDING

Press the cassette of STOP button.

WHEN THE END OF THE TAPE IS REACHED

The tape stop and the buttons are released automatically. To record on the

other side, turn the cassette over and press the cassette of RECORD button

again.

TO ERASE A RECORDED TAPE

1. Slide the FUNCTION switch to TAPE.

2. Insert a tape with the side you want to erase facing you.

3. Press the cassette of RECORD button to start erasing.

RECORDING FROM THE RADIO

( Refer to radio operation )

RECORDING FROM A CD

( Refer to CD play )

1. Slide the FUNCTION switch to CD. " " is shown in the display.

2. Open the CD door. Place a disc in the centre with the label side up and

then close the CD door gently. The total number of tracks will show in

the display.

3. Press the CD PLAY/PAUSE button to start CD play. The CD PLAY

" " indicator will light.

• Adjust the VOLUME.

USING THE CD PLAYER

USING THE CASSETTE COMPARTMENT

7. CD display

8. CD SKIP button

9. CD SKIP button

10. Cassette compartment

11. Tuning control

12. BAND switch

13. PHONES jack

14. VOLUME control

15. FUNCTION switch

16. AC socket

To AC inlet

To wall AC outlet

Play " " indicator

Pause " " indicator

Repeat all " " indicator

Repeat one " " indicator

Track number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durabrand CDA1366 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info