613288
81
Zoom out
Zoom in
Vorherige Seite
1/103
Nächste Seite
8.6.2 Application messages
Picto- Description Category Reaction / Troubleshooting
gram
Capacity counter is “zero” Hint
· Clamping foot can only be
lowered after
confirmation via the “OK”key.
After the confirmation, the hint
disappears.
· With the confirmation, the capacity
counter is reset to its
initial value again.
Handwheel turned
manually
Warning
After interruption of the sewing procedure:
· Impossible to continue sewing
· Stop the sewing process by
stepping the pedal backwards,
confirmation with push button key 1
(clamps) or pressing the ESC” key at
the control panel
seam pattern exceeds the
inner frame of the
clamping foot either -X or
+X direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
Contour exceeds the inner
frame of the clamping foot
in -X or +X direction and
Y-direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
· Reduce size of sewing pattern in
Y-direction
Contour exceeds the inner
frame of the clamping foot
in -X and -Y direction or
+Y-direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
Y-direction
Contour exceeds the inner
frame of the clamping foot
in +X and -Y direction or
+Y-direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in both
X- and Y-direction
Contour exceeds the inner
frame of the clamping foot
in X and -Y direction or
+Y-direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern
X-direction
Reduce Y-Offset in the corresponding
direction
Contour exceeds the inner
frame of the clamping foot
in -Y or +Y direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce Y-Offset in the corresponding
direction
1
79
81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Durkopp Adler 510 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Durkopp Adler 510

Durkopp Adler 510 Bedienungsanleitung - Deutsch - 103 seiten

Durkopp Adler 510 Bedienungsanleitung - Französisch - 103 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info