Bedienungsanleitung Durkopp Adler 528 (Seite 5 von 34) (Englisch)

613277

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Part A - Instruction manual

1. Proper use of the machine

The machine is designed mainly for sewing operations in the shoe manufacture for assembling quarters and linings, for sewing

through tongues, for sewing babouches and for decorative sewing of shoes. It is suitable for assembling leather and textile

materials in the fancy goods industry. In general, only dry material may be sewn on these machines, which should not be thicker

than 8 mm when being compressed by the presser foot. The material should not contain any hard objects, because in such

opposite case the sewing operation would be possible only with an eye protector. Such eye protector is not supplied for the time

being. When sewing very hard or compact materials with a thicker needle, the total thickness thereof is limited. In such case it is

also necessary to reduce substantially the sewing speed below the value quoted in the par. 5. These machines may be installed

and operated only in dry and maintained rooms.

As manufacturers of industrial sewing machines we start from the supposition that our machines will be operated at least by a

trained staff, so that all usual operating activities and their eventual risks may be supposed to be known.

Machine noisiness

The noisiness of machines is measured according to ISO 3746, ISO 11204 at the maximum sewing speed.

Laeq = equivalent noise level of the machine itself on the working place converted in % of the machine utilization (dB)  is given

in the following table

2. Description of the machine

It is flat-bed single-needle machine. It sews with double-thread zigzag lock-stitch, with two-way drop feed. The stitch length is

adjustable using a knob. The backward stitching is controlled by a hand lever, eventually, by pedal or by electromagnet in

accordance with the equipment of the machine. The width of the zig-zag stitch is adjustable with a lever on the machine arm. The

presser foot lifting is controlled by a hand lever, eventually, by pedal, or by a knee lever or by electromagnet in accordance with

the machine equipment.

The machine is provided with a large diameter horizontal hook. It has a 1.8 x greater reserve (volume) of threads than a standard

hook. The lubricating system of the machine is of a group wick-feed type with automatic regreasing of the hook.

3. Machine subclasses

Table 1

4. Survey of equipment

This survey does not include the equipment assembled on the stand (see part B).

4.1 -for the subclass -101

4.1.1 Necessary equipment

S791 995068 Parts of backtacking (with pedal)

4.1.2 Sewing equipment

S791 124027 35 Sewing equipment 528 E 027 - standard

S791 124028 35 Sewing equipment 528 E 028 - sewing speed max. 1800 SPM

Type of the Noisiness % machine

machine dB employment

528-101 83 20

528-105 83 20

Machine type Hook Presser foot lifting Backtacking Thread

trimmer

Class-subclass Large Via knee lever Via electro- Via hand Via Via electro-

or pedal magnet lever pedal magnet

528-101

528-105

•

optional equipment

standard equipment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 528 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 528

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info