Bedienungsanleitung Durkopp Adler 540-100 (Seite 7 von 48) (Englisch)

613272

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1. Product description

The Dürkopp Adler 540-100-1 is a CNC double lockstitch buttonhole

machine with stepping motor technology for the sewing of flat form

linen button holes in light to medium weight material. Maximum

buttonhole length is 65 mm and maximum buttonhole width is 6 mm

(equipment dependent).

Including a knife for all cutting lengths, longitudinal or transversal

setting possible, fine adjustment of the buttonhole with the push of a

button, integrated direct DC drive.

Additional functions:

–

Selectable bartack forms :

Cross tack (vertical), Cross tack (horizontal), Cross tack (divided),

Round tack (to the middle point), Round tack (horizontal), Taper

tack, Eye tack, Simple tack, Snaffle-shaped tack

–

50 variable seam makers

–

20 Buttonhole – each sequence can be programmed with a

maximum of 20 buttonholes

–

Programmable sewing revolution to a max. of 4000 stitches/min

–

Soft start

–

Bobbin capacity meter

–

Daily quantity meter

–

Multi test functions

–

Voltage rating: 1 x 190 - 240V 50/60Hz

1.1 Designated use

The DÜRKOPP ADLER 540-100-1 is an automatic sewing machine

designed for sewing buttonholes in light to medium-heavy material.

Such material, which is generally made of textile or synthetic fibres, is

used in the clothing industry. This sewing machine can also be used to

produce so-called technical seams. In this case, however, the operator

must assess the possible dangers which may arise (with which

DÜRKOPP ADLER would be happy to assist), since such applications

are on the one hand relatively unusual and, on the other, they are so

varied that no single set of criteria can c over them all. The outcome of

this assessment may require appropriate safety measures to be taken.

Generally only dry material may be sewn with this machine. The

material may be no thicker than 4 mm when compressed by the

lowered upper material sewing basket.

The material may not contain any hard objects. The machine may only

be operated with finger and eye protection. The seam is generally

produced with sewing threads of gauge up to 65/2 Nm (synthetic

threads with or without cotton covering). Before using any other thread

the possible dangers arising must be assessed and appropriate safety

measures taken if necessary. This machine may be set up and

operated only in dry, well-maintained premises. If it is used in other

premises which are not dry and well-maintained it may be necessary

to take further precautions (which should be agreed in advance - see

EN 60204-31: 1999). As manufacturers of industrial sewing machines

we proceed on the assumption that personnel who work on our

products will have received training at least sufficient to acquaint them

with all normal operations and with any hazards which these may

involve.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 540-100 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 540-100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info