613272
23
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
4.4 Hook thread monitoring
Hook thread monitoring mode of operation:
Hook thread monitoring is carried out by counting the buttonholes.
With the insertion of a full bobbin the hook thread counter is set to a
predetermined value. This value is subtracted by one with each
complete cycle. When the value 0 is reached the operator receives an
information message.
There should be some remaining thread on the bobbin.
Note
This principle only functions when the same amount of bobbin
thread is used per buttonhole or sequence. Changing frequently the
cut length, buttonhole form or buttonhole parameter changes the
amount of bobbin thread used per buttonhole.
4.4.1 Hook thread counter adjustment
Select the submenu “Hook thread counter”
With the ñ and ò keys choose in the main menu the line Hook
thread counter”.
Press OK-key.
The submenu Hook thread counter is displayed.
Submenu “Hook thread counter” displayed pa rameters:
Current hook thread counter value
N7.1
Sets the display in the main menu to the initial value indicated in N7.2
below.
With the ñ and ò keys select the relevant line.
By pressing the OK-key the indicated value in the main menu will
be set to the initial value.
The display changes automatically back to the main menu.
Initial value
N7.2
Total number of possible buttonholes with the remaining thread on the
bobbin.
Select the relevant line with the ñ and ò keys.
Press the OK-key.
The curser blinks under the position of a numerical value.
Move between the digits with the keys ï and ð.
Increase or decrease the digit value with the keys ñ and ò.
Confirm with the OK-key.
Choose line N7.1 with the arrow keys ñ and ò
By pressing the OK-key the indicated value in the main menu will
be set to the initial value.
The display changes automatically back to the main menu.
1
21
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Durkopp Adler 540-100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Durkopp Adler 540-100

Durkopp Adler 540-100 Bedienungsanleitung - Deutsch - 48 seiten

Durkopp Adler 540-100 Bedienungsanleitung - Französisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info