Bedienungsanleitung Durkopp Adler 550-12-23 (Seite 2 von 23) (Englisch)

613257

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

1. Product Description

1.1 Brief Description

The

550-12-23; -24

and

-12-26

are configured work stations for the

precrimping of upholstery pieces.

The work stations are equipped with a single-needle double locked

stitch machine with a differential drop feed (two independently-

adjustable feed dogs) and a differentiable, alternating top feed.

Via a keypad strip 15 different crimping values and 16 intermediate

values can be selected. A knee switch turns them on and off again. In

order to achieve a securer drawing of the stitches a second needle

thread tension is switched on when a crimping value is turned on. The

moment of switching on a second needle thread tension can be

preselected between crimping values 1 and 5 inclusive.

Drive and control of the work station occurs via a 3 phase motor in

conjunction with a Microcontrol control.

To increase the crimping intensity the work station is equipped with an

upper and /or lower tape feed and tensioning. The fixing tape width is

2,25 mm by the sub-classes 550-12-13; -12-14 and 3 mm by the

sub-class 550-12-16.

The tape tension can be turned on via a key and turned off through the

knee switch when the crimping value is switched off.

1.2 Proper Use

The

550-12-23; -24

and

-26

is a configured sewing station which can

be used for sewing light to medium heavy sewing material.

Such material is, as a rule, fabric composed of textile fibers or leather.

These sewing materials are used in the garment, furniture and car

upholstery industries.

Furthermore, it may be possible to also execute so-called technical

seams with this special sewing machine. Here, however, the operator

(DürkoppAdler AG would be applications are, on the one hand,

relatively rare and, on the other, their variety is immense. Depending

on the results of this evaluation it may be necessary to adopt

appropriate safety measures.

In general, only dry material may be worked with this special machine.

The material may not be thicker than 10 mm when it is pressed

together by the lowered unit could only be allowed to be operated with

eye protection. Such eye protection is not available at this time.

The seam is generally made with sewing yarns of textile fibers with

dimensions up to 15/3 NeB (cotton threads), 20/3 Nm (synthetic

threads) or 25/4 Nm (core spun threads). Those wishing to use other

threads must also first evaluate the dangers arising herefrom and, if

necassary, take safety measures.

This special sewing machine may only be ainstalled and operated in

dry and clean areas. If the sewing unit is employed in other areas,

which are not dry and clean, other, to be agreed upon, measures may

become necessary (see EN 60204-3-1: 1990).

We, as a manufacturer of industrial sewing machines, as that, at a

minimum, semi-skilled operating personel work on our products so that

all normal operations and, where applicable, their dangers can be

presumed to be known.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 550-12-23 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 550-12-23

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info