6.2.3 Checking of set positions
Position 1
–
Switch on the network switch.
–
Tread the pedal forwards shortly and release. The machine is
stopped in the position 1 (see 6.2.1).
–
Check the angle on the hand wheel scale (225° ± 5°).
Position 2
–
Tread the pedal forwards shortly at first and then entirely
backwards with the heel until the machine stops. The machine
stops in the position 2 (see 6.2.1).
–
Check the angle on the hand wheel scale (35° ± 5°).
6.3 Master reset
By means of the so-called master-reset all changed values are set
back to the preset ones again.
How to proceed with the master reset is described in the instructions
of the motor manufacturer Efka.
21
