Bedienungsanleitung Durkopp Adler 971-805 (Seite 2 von 24) (Englisch)

612058

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

1. Product Description

1.1 Short Description

The 971 is a rotary unit for the sewing of e.g. flaps, strips and

waistband extensions as well as for the runstitching of cuffs.

The rotation concept makes possible an overlapping work method and

thus leads to high quantity outputs. Through an optimal work place

design, short reach distances and a high operational comfort are

achieved.

The 971 has work stations for feeding the material, for sewing, for

trimming the protruding cloth ends and for stacking the finished pieces

when sewn. They are feed via a turntable on which are mounted the

individual material holders. Depending on the sub-class partitions with

4, 6 or 8 material holders are available. When sewing cuffs the size

can be adjusted. The speed of rotation is continuously adjustable and

can be adjusted to meet the appropriate requirements.

Through a special tape roll holder cuffs whose face fabric has

previously been basted to a feed tape by a cuff basting unit and then

wound onto a tape roll can be runstitched.

The double chain stitch sewing head of the 971 is equipped with a

needle and hook thread monitor which automatically stops the sewing

unit by thread breakage or the end of the yarn.

Parallel trimming and the cutting of the warp is conducted at the

trimming head. With appropriate parts sets the trimming clearance can

be changed.

For drawing off the trimming residue suction units with single or two

sided suction are available. The appropriate air compressor can be

supplied in versions with different voltages.

1.2 Description of the Proper Use and the Proper Application

The 971 is a sewing unit designed for use in sewing from very light to

medium weight material. Such material is, as a rule, material

composed of textile fibers. This sewing material is used in the garment

industry.

In general, only dry material may be worked on this sewing unit. The

material may not be thicker than 3 mm when it is pressed together by

the closed material holder. The material may contain no hard elements

because the sewing and trimming heads must otherwise be operated

only with eye protection. Such an eye protection is, however, not

available at this time.

The seam is generally made with sewing yarns of textile fibers in the

size 80/2 Nm (synthetic) or 140/3 Nm (covering twist). Those wishing

to use other threads must first calulate the dangers arising from this

and take appropriate safety measures.

This sewing unit may only be installed and operated in dry and well

cared-for areas. If the sewing unit is used in other areas, which are not

dry and well cared-for, comprehensive, to be agreed upon, steps may

become necessary (see EN 60204-3-1:1990).

We as a manufacturer of industrial sewing machines assume that at

least semi-skilled personnel will work on our products, so that it can be

presumed all normal operations and, if applicable, their dangers are

known and recognized.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Durkopp Adler 971-805 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Durkopp Adler 971-805

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info